wiring sub n amp

[phatrichboii]

What the best way to wirer your wires from the boot to the battery and head unit??

[phatrichboii]

Sorry ment best way to feed my wires from the boot 2 my battery

[laberridge]

down the side of your door sills, jsut pull the carpet out around the door seal and fit them down there.

[phatrichboii]

how do you feed it throught to the battery?? and do you put all the other wires there as well

[Noddy]

haha! you're close to me

underneath and behind the glovebox is a rubber grommit, that where the power cable runs through. run the then down the passenger side of the car. all the other cables (ie RCA, remote etc) get run down the drivers side.

[demon_dan]

Have a read of this mate: http://www.saxperience.com/forum/showthread.php?t=62418 I found it a bit of a nightmare in my VTR compared to my 1.1 coz there's carpet in the bay.
Also have a read of these: http://www.saxperience.com/forum/showthread.php?t=78526 Should be pretty much all you need to know
I run my wires along the middle of my car so the carpet doesn't pull away from the sill. Take the front seats out, much easier. Don't run the power cable along with the RCA, remote etc. Also make sure you've got a decent power cable, don't run a 10awg then after it's all up and running, wish you'd used a 4 or 0 ...it's a pain to change it all ...start off doing it right, then you can add more subs/amps whatever and not worry about the power cable :y: