PDA

View Full Version : Heater and rear heated window not working


safcdaft
29th November 2009, 12:46
Hi guys I have no heater in my saxo vts and no rear heated window, the PAS is working fine. I have tryed to look for the 2 brown wires under the steering cowling but can only see the 2 red. Am i missing something and how can I sort the problem if I dont have the brown wires to bridge?

Lew_C
29th November 2009, 13:03
very strange that your power steering is running fine and the heater and rear heated window isn't, are you sure pas is working fine?

safcdaft
29th November 2009, 13:19
yeah PAS works spot on, Thought it might be the problem with the ignition barrel,i just cant find the 2 brown wires to bridge

stumac77
29th November 2009, 13:27
try the block fuse at the passenger side you should have a black 1 and a yellow 1 it,s the black 1 take it out and give it a clean

safcdaft
29th November 2009, 13:36
Never had the black block fuse. and the Heaters worked fine for years?

safcdaft
29th November 2009, 14:10
Just checked the wires again. Ther are 2 brown wires but not together like in the picture in the faq section. 1 is with a white wire and the other is with a blue. Do I have to bridge these 2 brown wires, I don't want to go cutting wires that I don't need to.

safcdaft
29th November 2009, 15:11
Im starting to think someone else might have already had ago at this and thats why I cant find the bloody stupid wires. Has anyone any ideas, its getting pretty cold in the morning and I dont fancy freezing my bollocks off.:wall:

Steffrallye
29th November 2009, 16:05
FUSE......

safcdaft
3rd December 2009, 11:07
all fuse are OK, nothing blowen. This black rel;ay is it in the passaneger footwell with the fuses or under the bonnete next to the passanger wing?

safcdaft
3rd December 2009, 11:25
After much head scratching, swearing and cups of tea, I am now giving up on finding the elsuive brown wires to bridge. Instaed I am just going to replace the ignition. The question now is how big/easy of a job is this, will it be ok to source the part from a scrappy or do I need to buy new? Whats the deal with the key code etc?