PDA

View Full Version : how to fit 106 seats


saxo651
2nd December 2009, 21:28
got seats front and back just wondering how to fit and what do you do to the air bag orange wire???

AlexB
2nd December 2009, 21:40
they just unplug and plug into the new seats

make sure your battery is disconnected though

CarlosVT
2nd December 2009, 21:45
theres a guide mate..

http://www.saxperience.com/forum/showthread.php?t=121742

:y:

saxo651
3rd December 2009, 18:21
the guide says you need more brackets to fit the rear is this true or is it just a stright swap for old seats and new seats

shaneio
3rd December 2009, 18:23
depends if the rear bench splits mate

CarlosVT
3rd December 2009, 20:12
the guide says you need more brackets to fit the rear is this true or is it just a stright swap for old seats and new seats

In most cases you need extra brackets to fit the rear seats.

saxo651
4th December 2009, 09:14
where do the brakets go and where can you buy them

CarlosVT
4th December 2009, 15:14
where do the brakets go and where can you buy them

It says on the guide mate. Just have a read through it.

saxo651
7th December 2009, 15:42
right lads and ladies i have fitted the seats they came today but have not fitted the drivers side seat can get all the screws out apart from the one closest to the gear stcik and handbrake have tried wd40 it will not budge?????

HELPPPPPPPPPP

craig1gk
7th December 2009, 15:44
i took mine to the garage to get them to loosen it for me mate, i ahd the same problem

also for the rear bench and seat back you dont need the middle brackets as the parcel shelf supports it well enough, but better safe than sorry in the long run tbh

i couldnt get the old airbag wire to clip in so i just took the old wire from my vtr seats and plugged it in and ziptied the old airbag wire ect under my new seats if you get me

saxo651
7th December 2009, 20:04
any other ideas on how to remove the screw need help sooooooon