If water gets into the oil

[waynaldo1]

Can it be cleaned as my old saxo had the same problem and I could not get the oil out ov the cooling system .. (Sold it me that way)

But my heads on its way out now and dont want the oil getting into the water before I get it sorted

[VTomR]

Yes you can get it out, but it will take alot of flushing of the cooling system, with detergent.
Get the head sorted asap tbh mate.

[onepd]

water and oil dont mix ,so as mentioned plenty of flushing or say bye to the engine

[waynaldo1]

water and oil dont mix ,so as mentioned plenty of flushing or say bye to the engine

Thats what asking if the oil gets into the oil from the head blown.. Is it worth getting it flushed or time to get rid of the car

[AlexB]

time to spend on a new headgasket

flushing wont do anything if its mixing somethings fucked
so either spend on a gasket
or get rid

[waynaldo1]

Im getting the head gasket soon as I can but trying say if the oil gets into the coolent.. After I fix the head. Can I flush the oil out and will the engine be ok

[VTomR]

Im getting the head gasket soon as I can but trying say if the oil gets into the coolent.. After I fix the head. Can I flush the oil out and will the engine be ok

If your doing it yourself, fit the new headgasket, then flush the cooling system completley with detergent untill you can clearley see that theres no oil contamination in the system.
Flushing the oil out of the engine? you will be draining it to do the headgasket any way?
You have oil going into water not the otherway round, the oil in the engine should be fine. No oil will go into the cooling system after aslong as the headgasket has been fitted correctley.

I wouldnt run the car for long without flushing the cooling system after doing the headgasket.

Hope that answers it????