tyre pressures needed quickk?

[D8N_LL]

just got the misses some new alloys and have no idea what the tyre pressures should be? dont want her driving about with the wrong pressures, especially in these conditions...

the cars a C2
they are 16" alloys and the tyres are..
205/45 ZR16 87 W

[maddison_vts]

open the drivers door, look down at where the hinge is and there is normally a sticker indicating what pressure to put in.

failing that, 2bar is the normal pressure (around 29psi) just stick that in, the car won't just fall off the road because of incorrect tyre pressures.

[D8N_LL]

open the drivers door, look down at where the hinge is and there is normally a sticker indicating what pressure to put in.

failing that, 2bar is the normal pressure (around 29psi) just stick that in, the car won't just fall off the road because of incorrect tyre pressures.

they are aftermarket alloys though mate and are 2 inches bigger than the standards?

[maddison_vts]

doesn't really make any difference bud.

[Meto]

Just whack about 33psi in all round. Enough grip round corners but not rock solid when going over bumps.

I got 35 psi in my 1.1. Fuel economy ftw!

[stinkycheese]

higher psi on the front retards

[D8N_LL]

higher psi on the front retards

would you say 32 front, 30 rear?

[stinkycheese]

would you say 32 front, 30 rear?

yeah, i reckon

[stinkycheese]

http://www.thetyrepressuremonitor.com/locate.asp?action=step2&maker=5

[D8N_LL]

http://www.thetyrepressuremonitor.com/locate.asp?action=step2&maker=5

thanks mate