PDA

View Full Version : Important! : Interior light ???


Shea
29th January 2010, 21:13
hi, got in my saxo this afternoon, its not on the road yet as i havent passed my test yet but i keep running it everynight to make sure its ok :) I got in and the interior light had frozen on the inside and the bulb will now not work... but i cannot figure out how to get to the light, do i take the arial out and ork down onto it or is there a way to get to it?
also i think the seal has gone on the areal and thats why its letting in water :S
any help???

Mochachino
29th January 2010, 21:16
You prize it out out from the inside, and the bulbs in the like lense bit that comes out.

stevo67
29th January 2010, 21:18
Small flat blade screwdriver & gently prise it out from the edge,the bulb undoes by twisting it from the rear of the light unit.

Steve.

-Alex-
29th January 2010, 21:19
I had to fix my roof, what you need to do is prize out the interior light gently. Unplug it. On the roof you will see a cable going to a nut. Undo the nut. Pull the ariel base off. Clean the crap off the paint work. Add waterproof silicone. And reverse the steps to put it back together :)

Shea
30th January 2010, 00:39
thanks, shall get that done after work :)