door speakers?

[soldier]

my cousin gave me some Kenwood KFC-1777 Coaxial Car Speaker 160 watts peak and 40 nominal RMS.Are these quality?

and shall i put these in the front and put the standard ones in the back or the other way round??

and is this operation hard?

thanks

[VTaaRon]

there free cant be bad! the rear speakers from what i gather are only 10cm the fronts are bigger so swapping front to back wont work lad

[soldier]

is the front door card easy to open doh?

[Robb]

Yeh you can just remove the speaker grill or if you want to remove the whole door card then you need a torxs screwdriver and unclip the whole card...

[Scott]

by the looks of the model number are those 17cm speakers? if so they wont go straight in, either custom builds or an MDF spacer might do it

[saxo_2004]

those are 17cm speakers mate checked on
www.bassjunkies.com (http://www.bassjunkies.com)

[soldier]

i think these speakers might be 17 cm.(damn)Scott or anyone else can give me some more device on custom builds and mdf?

[VTaaRon]

fiber glass and body filer would be best will take a little while to do but well worth it

[soldier]

isn't there a more simple and easy way as i havent got a clue about fibre glass etc.

[Mattvtr]

You can buy em but if your on a low bugdet then better off selling the 1s youve got and buy sum that will fit

[soldier]

is the no other solution? What would be the main problem of taking the standard speakers and replace them with these 17cm kenwoods?

[Mattvtr]

they wouldnt fit, there isnt enough room to make your own mount for them.

[Mattvtr]

could just put em in the parcel shelf actually but theres no point if youve got 2 sets of speakers in already, would be less power going to each set of speakers.

[Scott]

you could try an mdf spacer that you screw to the door then the speaker to that, all depends on the depth and construction of the basket. Using the spacer you might have to chop some of the inside of the door card off