PDA

View Full Version : clutch help


stendog
9th March 2010, 17:04
clutch needs to be changed this week so will be looking at getting either of the ones listed below, once fitted i will be purchasing a vts box and was thinking i could use the clutch purchased when i change the box? which one would you go for and will i be able to just use the clutch after it been in the vtr box and use it in the vts box?
http://www.eurocarparts.com/ecp/c/Citroen_Saxo_1.6_1999/p/Car-Parts/Transmission/Clutch-and-Associated-Parts/Clutch-kits/?641545021&1&6617d8e318eda8b285a262c43e3cdc31f176ecbb&CLUK
http://www.eurocarparts.com/ecp/c/Citroen_Saxo_1.6_1999/p/Car-Parts/Transmission/Clutch-and-Associated-Parts/Clutch-kits/?641545020&1&6617d8e318eda8b285a262c43e3cdc31f176ecbb&CLUK

raunchz
9th March 2010, 17:05
yes - for mk1 flywhels

ash-vts
9th March 2010, 17:06
yes but wudnt bother its worth paying the extra for the standard valeo one

stendog
9th March 2010, 17:14
looks like valeo it is, will only be doing a few thousand miles tops befor i put the vts box on which is of moxys mk2 vts will it be fine to use for that?

Sparco_Tom
9th March 2010, 17:56
Get the valeo, AVOID the transmech at all cost

stendog
9th March 2010, 18:00
have just seen the picyou posted so will definately be going for valeo, now just need to now if this clutch will fit in a mk2 vts gearbox ready for when i change the box?

Sparco_Tom
9th March 2010, 18:09
what year is the engine? Chances are it will use the later flywheel patern. Just buy a valeo 2003 vts clutch kit

stendog
9th March 2010, 22:29
engine is a 99 mk1 single plug and the gearbox is of a mk2 3 plug

Sparco_Tom
9th March 2010, 22:55
ahh then order a clutch off a 97-98 vtr/vts