Log in

View Full Version : amp problems


Junaid
21st March 2010, 19:23
brought a new Vibe sub and amp
me and my mates done all the wiring but the amp light wont come on?
we thought the amp had gone tried another amp that worked that didnt work either ? any ideas

chinkostu
21st March 2010, 19:33
wrong section

checked ground is bolted down properly? or any wires for that matter!

Reevesie
21st March 2010, 23:08
As above wrong section, but ...
you say you done the wiring yourself, have you fused the wire that goes from battery to amp? if not do it, if you have check that it is working with a new fuse, not expensive to replace. This was the problem i had, also check that the fuses in the wire and the amp are the same, not 100% that this matters but worth a go.

Make sure that the ground wire is touching bare metal and not painted metal, just scratch the metal beneath the connection if not :y:

Junaid
22nd March 2010, 21:32
As above wrong section, but ...
you say you done the wiring yourself, have you fused the wire that goes from battery to amp? if not do it, if you have check that it is working with a new fuse, not expensive to replace. This was the problem i had, also check that the fuses in the wire and the amp are the same, not 100% that this matters but worth a go.

Make sure that the ground wire is touching bare metal and not painted metal, just scratch the metal beneath the connection if not :y:

ye it was the ground wire :y:

Reevesie
23rd March 2010, 22:16
ye it was the ground wire :y:

Glad you got it sorted, no need to thank me ;)