6x9 Wiring help?

[DavidsVTR]

i know many of you hate them.. but i seem to liek them
so was wondering if any of you have a diagram or istuctions on how to wire them?

how it connects to headunit?
what cable?
Etc

Many thanks

[stormjojo1982]

your easiest option would be to take the wiring from your rear speakers and connect to the 6 x 9's you would just need some crimp connectors and a little bit of extra wire to run under the parcel shelf.

[JonCarter]

pretty simple to do, or if you have a subwoof, you could rig it onto the amp, it gives a more clear sound and tends to distort less imo :)

[Pidge]

on your speaker iso plug behind the headunit will have 8 wires in. it is the 2 on each end of the plug that is your left rear n right rear :)

[Jo3fish]

Id fit sub's, and then wire them in through the amp, you'll get a much better sound.

Spade connectors is the typical thing for 6x9's, so some quality speeker cable, and spade connecters, bob's your uncle, fanny's your aunt.

If not, just take the cables from your rear speakers.

[Moke]

Id fit sub's, and then wire them in through the amp, you'll get a much better sound.

Spade connectors is the typical thing for 6x9's, so some quality speeker cable, and spade connecters, bob's your uncle, fanny's your aunt.

If not, just take the cables from your rear speakers.

This :y:

Also, when buying 6x9's you get good quality speaker cabling with them.

[JonCarter]

This :y:

Also, when buying 6x9's you get good quality speaker cabling with them.

Get 100% oxygen free copper wire, its better in some way i cant remember my brothers mate gave me a big ass reel of it.