weldling doors

[0790hooper]

my doors bent as bloke has welded door hinges on wrong and bent the door to fit into place and lots of wind coming through so how much would it cost to get the hinges snaopped of car and welded bak in correct place and when doors of will bend easier and can then put back on car so how much for this job

[AshC]

Can you try and construct it a litte better, i.e fullstops, I cant make sense of the last bit mate

[Mochachino]

lol at that.

Be simple enough to do yourself i guess. Saw or grind off the hinge. Then grind it down smooth on the car. Then depending what the threaded holes are like either weld a plate over it with holes drilled out and redrill the holes for the hinge. Or just rethread the ones already in there if theyre threaded or just use a bolt n nut instead. Refit door with a new hinge, wollah.

Prep it all yourself then just pay like £20 for the welding.

[saxovtsmad]

take it back to who welded it and get them sort it

[chapperz]

my passenger doors bent from someone tryin to nick the car, cant use the window cos the guide clip just pops out when it gets to the kink in the door. does anyone know if its possible to bend back into shape?? i think it'll probabley need the window runner putting back into shape aswell?? any advise??

[pepper953]

get a second hand door in same colour cheaper than fixing old door

[viciousjello]

get a second hand door in same colour cheaper than fixing old door

As above

[chapperz]

yeh, ill look into that theres a few breakers near here, thanks for advise.:y: