front bumper

[stephen34]

i have a mark 2 saxo and the front bumper has dropped abit on the drivers side is this is too fix ? or could any one give my some pointers

[sax-dan]

i have this problem, yet too look at it yet though.

[stephen34]

yes just wanted to know if it is easy to sort out with out breaking it

[sax-dan]

i could do with knowing too mate..

[iSlayeR]

Best option, take the front bumper off, check all clips etc are not broke, then go from there

[stephen34]

ok is it easy to take off buddy ?

[sax-dan]

mines only dropped like 10mm, and can lift it back up to the right hieght it just drops again

[Pimpflatarch]

I got this problem also lol

[stephen34]

lol :)

[GoonS_VTR]

taking the front bumber off is very easy. Right firstly you should unclip the plastic trim underneath your head lights. Then you should take the front wheels off and put it on axel stands, then unscrew the screw at either side they should be located underneith the plastic s**h shields so take them off, the screw i quite high up in the wheel arch you should be able to see it, Then you also should be able to see the frame of the car where the bumber is bolted to so unscrew that and finally unscrewing the two securing screws from the bottom edge of the bumper. disconnect the front fog light wiring andthe washer tubes unclip the bumper at each side then pull it towards you and it should come off. sorry if it doesn't make sense but its the best i can do lol have a go cant hurt nothing

[huggy54]

i had this problem, i'm 99% sure its your slam panel