206 1.6 16v engine [Archive] - Saxperience

citroen_saxo_vtr

27th April 2010, 21:03

Is this engine the same as the vts engine? I no the rocker is different but would the engine fit in a saxo with saxo mounts? Just a random thought.

Chico999

27th April 2010, 21:12

Pretty sure thats the TU5JP4 engine?

If it is then yes it does fit, also has bigger inlet valves. Your better putting a vts cam in it though.

Correct me if im wrong

citroen_saxo_vtr

27th April 2010, 21:13

Thats what i was thinking it maybe the jp4 engine but then the c2 came to mind.

Bickerton

27th April 2010, 21:19

Thats what i was thinking it maybe the jp4 engine but then the c2 came to mind.

C2 is a jp4 too..

Quick

27th April 2010, 21:24

Same as a C2 Vts - later version of the engine than fitted to the Saxo.
Often in a lower spec of tune.

Ax_beefy

27th April 2010, 22:52

Same as a C2 Vts - later version of the engine than fitted to the Saxo.
Often in a lower spec of tune.

Identical to C2 VTr 110hp, but with saxo inlet (you have to change this), saxo exhaust and saxo management should bump up to around 120-125hp. Or atleast thats going from my experience of them. You need to swap the cambelt covers (along with belt tensioner) and sump aswell and need to fit a VTS driver side mounting block. They are a little bit annoying though as the new ones don't have the pre-tapped oil pressure guage hole so you have to use a sandwich plate for it.