Thinking of getting these, are they ok

[VinceVTS]

I had an advisory for my brake discs on my last MOT so am looking to get a nice set of front ones, I have a 1.4i 1998 citreon saxo westocast, i think the correct measurements for my frint discs are

247mm x 20mm but am unsure, im gonna get these

http://cgi.ebay.co.uk/CITROEN-SAXO-VTR-VTS-Front-DRILLED-BRAKE-DISCS-PADS-/290265071733?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4395258075

Can someone tell me if their anygood or not or if there the wrong discs, im looking to get drilled and grooved but if i shouldnt please let me know

If anyone has anywhere else thats better to buy discs from please let me know

Many thankx

Vince

[saxo_singh]

they seem to be fine by me mate, similar to my discs. but change the pads aswell to ebc or any other performance pads as normal pads will just burn out when you brake.

[VinceVTS]

ok so ill get them discs and then a set of ebc green stuff brake pads yeah??

[saxo_singh]

Ive just noticed you get pads anyway with that brake kit, should be fine then tbh.
go for it! :y:

[frankie]

if there made from cheap and shite metal...

they'll do more harm than good.

[VinceVTS]

i dont know what there like thats the problem, i think they would be fine heres the company that makes them

http://www.motorsport-engineering.co.uk/shop/products/Red-Dot-1.4-SX-1.5D-Front-Disc-Drilled-amp;-Grooved-96-FF2021

they look ok, i just dont want to pay an arm and a leg for them

I could get these but i think there the wrong discs

http://cgi.ebay.co.uk/Brembo-Brake-Disc-CITROEN-Saxo-1-4-96-04-/330364607147?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4ceb43daab

am i wright in thinking that the westcoast model runs the same as the vtr and vts 274 and 20.5mm

Is that right

[VinceVTS]

bought the ones with pads lol, will see what there like when they get here

[Dealzvts]

Let me know if they fit m8 becauz i was lookin at them for my furio

[Phreaktwo]

Looks like a good price getting the pads in with it. Might have to buy a set for mine!

[Jamb0]

Drilled and grooved the way to go, nice and cool :)

[Chico999]

Drilled and grooved the way to go, nice and cool :)

Make no difference

Look good though :p

[Jamb0]

thought the drill holes let more air breathe? no? lol

[damiandvs]

they should do the trick :p

[PhillipM]

thought the drill holes let more air breathe? no? lol

Nah, just somewhere for cracks to form, they're lighter though.

[Mikol]

Discs are discs. The money you spend on flashy discs could be much better spent on uprated pads.

Plain discs or grooved if you really must.

[PhillipM]

Plain or 2-piece with ally bells ;)

[Mikol]

Very fancy ^

I got quoted £300 a pair for some once haha :D

[PhillipM]

I made mine :D

[Mikol]

One word - price?

[PhillipM]

About the same as you got quoted :lol:

[sam2kk8]

i got some used ones in my sale thread you can have for cheap :)

[LSOfreak]

grooved eat through pads like mad and drilled tend to crack. your better off with solid vented discs. Are you aure the westcoasts run vented discs?

[Mikol]

About the same as you got quoted :lol:

Ah balls haha, nevermind then bud :P

[PhillipM]

Might have been me that quoted you, I'm sure I know that name from somewhere :D

[Mikol]

Nah that was from God Speed Brakes, got a link to them on the RR.

All swings and roundabouts now anyways, I did want rotors & bells but for that price I just redrilled some stock discs instead. Job done.

[PhillipM]

Shall I upset you with a shiny picture? :D

[PhillipM]

i got some used ones in my sale thread you can have for cheap :)

2-piece?
I can't see the for sale section yet :sad: