Newbie East Mids

[Vtr_AMH]

I recently bought my VTR already having issues with it but this is how it stands atm!
http://i1039.photobucket.com/albums/a479/AL291188/IMAG0020.jpg
http://i1039.photobucket.com/albums/a479/AL291188/IMAG0021.jpg
http://i1039.photobucket.com/albums/a479/AL291188/IMAG0022.jpg

[VTR_Craig]

Looks nice mate.
What issues are you having?
Where abouts in the east midlands are you?
I used to have them wheels on mine, i have one pretty much brand new for sale at the moment.
Whats the plans?

[dav0506]

Nice car, very nice red colour.

[vtsal]

Welcome matey and nice looking VTR!!

Al

[Mochachino]

Holaaaaaa

[Vtr_AMH]

I've had to replace the driveshaft on drivers side, new anti-roll bars. Current issues are split front exhaust pipe which i'm trying to get hold of replacement as it consists of the Cat aswell, and also i need a new HUB or wheel bearing for the drivers side also. But all in all not bad for £990 for saying its 02plate with 86000.
I'm from swadlincote area, where bouts are you VTR_Craig.
No plans really will see what happens when i get issues sorted, but has the alloys and lowered with a jetex cat back system on it.

[tyler]

like the rims, welcome

[motty]

i seen you in moira the other day i think

[Vtr_AMH]

Probably i only live in Albert Village, i see you about in your Cupra, that things rapid. You've prob heard how shite my car sounds atm wi a massive hole in it. Sounds like a tank.

[motty]

Yeah i think it was you then mate, The cupra's quick but it only does 2-3mpg when u boot it. I thought it was blowing when i herd it, Im thinking about buying the supersprint track system, used to run 1 on my 106 they sound great.

[Vtr_AMH]

yh hopefully get the exhaust 100% soon. Whats the fastest you had out ya cupra?

[Purple-john]

nice motor

[x_steph_vts_x]

Welcome !!!
What size are your alloys ?

[motty]

yh hopefully get the exhaust 100% soon. Whats the fastest you had out ya cupra?

it ran 162 on the dyno at monster motosport but ive only done 145 it would of gone over that easily though, that was with the smaller turbo aswell ive put a bigger one on since then.

[Mercy]

Welcome mate :D Nice clean n tidy Sax you got ther mate

[mattyjones]

welcome mate im only down the road in loughborough organising a meet in loughborough for next month ill get in touch with ya hope you can make it and theres one in leicester at the end of the month hope you can make that one too :)

[mimi179]

welcome!

[Vtr_AMH]

Welcome !!!
What size are your alloys ?

There 195/45 15"

Matty jones yeah just send us a message and i'll see bout coming along.
Cheers

[mattyjones]

There 195/45 15"

Matty jones yeah just send us a message and i'll see bout coming along.
Cheers

will do :)

[Vtr_AMH]

will do :)

Do you know of anywhere local to pick up saxo parts excluding citroen. As i've tried a few scrappies but they dont seem to have what i'm after.
Cheers

[motty]

Do you know of anywhere local to pick up saxo parts excluding citroen. As i've tried a few scrappies but they dont seem to have what i'm after.
Cheers

have you tried the end of the line in swad? i went there other day a pick a few bits up. Other than that there is a scrap yard in derby my mate was tellin me about that only has saxo's in, il try and find out where it is for you. unless you know him his names dale hes got that shit brown ded low saxo if u do just ask him.

[mimi179]

welcomessss

[Philly1983]

Nice looking VTR mate, lovely alloy's.

[Vtr_AMH]

have you tried the end of the line in swad? i went there other day a pick a few bits up. Other than that there is a scrap yard in derby my mate was tellin me about that only has saxo's in, il try and find out where it is for you. unless you know him his names dale hes got that shit brown ded low saxo if u do just ask him.

No i've not tried there where bouts is it mate? i dont know dale do you know many people round our area with saxo's, yeah if you can find out for me would be great. Hows your car coming along?
Got a replacement part for my exhaust cost me 30 quid so get to here it properly now without it sounding like a bloody tank.

Cheers for the comments guys and gals

[motty]

No i've not tried there where bouts is it mate? i dont know dale do you know many people round our area with saxo's, yeah if you can find out for me would be great. Hows your car coming along?
Got a replacement part for my exhaust cost me 30 quid so get to here it properly now without it sounding like a bloody tank.

Cheers for the comments guys and gals

il ask dale for you tonight mate if i see him, i know a couple of people with saxo's both are blue from moira, i cut the cat out of mine today, still need to buy a backbox for it though, other than that not done alot to it, found out its got vts calipers on the front today and ive put some 20mm spacers on the back, yours sounding a lot better now then?

[motty]

the end of the line is behind the american diner by lentons garage, folllow the road around and you'll come to a skip place and theres normaly loads of saxo's and 106s there

[Vtr_AMH]

Well waitin for part to come so will swap it straight over, yh i know where u mean now i'll go have a scout bout sometime. I raced a lad in a blue saxo other day wernt too happy wi me. Need new bearin for mine aswell now all money aint had it 100% yet but prob wont happen

[motty]

it would probly have been matt, it bounces down the road its on the bump stops which aint good at all. Ive got to put a drive shaft in mine think im gonna go fetch 1 from the end of the line 2moz.

[stokedrich]

Welcome aboard m8 T

[mattyjones]

Do you know of anywhere local to pick up saxo parts excluding citroen. As i've tried a few scrappies but they dont seem to have what i'm after.
Cheers

... i get most of my stuff off fleabay pal or here but citroen as i work nextdoor :P

[warner88vts]

welcome cant you weld it up mate

[Millsy999]

welcome to sax p. Nice motor (y)

[Vtr_AMH]

I thought of welding it cuz i put a temp bandage seal on it but it disintegrated the bandage and split open and now the centre is detatched from the front pipe. New pipe should be here soon.
Cheers for comments guys and gals
Any suggestions of what to do with it welcome
cheers

[hawkonater]

welcome mate. nice car. like the smoothed tail

[L20VTS]

welcome to sax-p

were also from swad will look out for ya :)

btw theres a scrappers in cannock with loads of saxo parts atm got a blue vtr and a wicked red vts is there atm

[Vtr_AMH]

welcome to sax-p

were also from swad will look out for ya :)

btw theres a scrappers in cannock with loads of saxo parts atm got a blue vtr and a wicked red vts is there atm

Yeah same mate
I'll look into it no doubt i'll be on the scout again soon.
Cheers

[x_steph_vts_x]

There 195/45 15"

Matty jones yeah just send us a message and i'll see bout coming along.
Cheers

mmmm might have to get some as they suit that colour :P

[chuckie01_4]

l20 vts

is that cos ur old red one is in there lol

[x_steph_vts_x]

welcome to sax-p

were also from swad will look out for ya :)

btw theres a scrappers in cannock with loads of saxo parts atm got a blue vtr and a wicked red vts is there atm

wheres cannock ?????????????????

[motty]

just past tamworth

[L20VTS]

Nar not sure where my red one went that wouldnt be worth getting anything off even if we found it as we had it all lol!

Cannock is just down the A38 from Burton kinda past Lichfield