Toad Chirp (SOLVED)

[nathan818]

ok i have a ai606

but it doesnt chirp when i lock and unlock the car,i can get the pin in but i cant get the chirp working,can anyone help ?

sorted.

1. Enter your pin
2. Ignition on
3. Press button 1 (should chirp),mine chirped after i put the pin in instead,i got no chirp on this one)
4. Ignition off then on again
5. Button 1 again - LED turns red (and chrips on my alarm)
6. Ignition off then on again
7. Push Button 1 5 times(do not count the chirps if it doesnt chirp on the first one,count the button presses)
8. Press buttons 1 + 2 together
9. Wait until it chirps a few times(or once) then turn the ignition off .

test it out.


Volume levels,
At step 5 press button 1 twice the led will go green
At step 7 press button 1 4 times (count button presses not

When you enter the menu the LED should be green for default.
press 1 + 2 the LED should go orange
press 1 + 2 again and it should go red.

turn ignition off and wait for the chirp or chirps


big thanks to MR_TOAD

Please note:i take no responsibly for other settings changed,its very easy to get the wrong switches,follow this guide at your own risk.

[Juggyluggs]

give MR_Toad a shout he slammed my alarm on my car same as yours he should help you out

[coalpoolwalla]

i would also like to know this

[J222JRA]

Just PM Mr_Toad...he will sort you out guys

[nathan818]

yea ive gave him a pm :)

[jphni20]

I installed mine the other day and it didnt do this which the manual said was default.

You have to go through the menus and enable the chrip on lock and unlock.

Sorted mine.

1. Enter your pin
2. Ignition on
3. Press button 1 (should chirp)
4. Ignition off then on again
5. Button 1 again - LED turns red
6. Ignition off then on again
7. Button 1 5 times
8. Press buttons 1 + 2 together
9. Wait until it chirps a few times then turn the ignition off and try that. Maybe you didnt wait for the last chirps.

[nathan818]

i think i didnt :P wait for the last chirps,i just turned the igniton of and waited for the 1 chirp


got the 5 chirps,and waited with the ignition on and it gave 1 chirp,then i turned it off and nothing :/

[jphni20]

Just looked the manual you need to turn the ignition off after pressing buttons 1 + 2 together then wait for a double chirp.

[nathan818]

yea i only get a single chirp at the end :(

[jphni20]

Im gonna go out and change the length of time my headlights stay on for and check that I get a double chirp.

[nathan818]

im gonna phone toad tomorrow,get it sorted then

you can have your headlights on after you lock it ? ? :O!

[jphni20]

I have my headlights wired up so that holding button 4 for 3 secs turns them on. Pretty handy and can set the duration for between 1 and 250 secs.

When I change the option it double chirped then I tunred ignition off and it gave a single which according to the manual should have been a double but it still saved the new setting.

Did you try changing the volume of the chirp and pre-warn. I set everything to full volume. (menu 2 - 4)

[nathan818]

maybe,how would i access that :P

push button 2 instead of 4 at one point?

[jphni20]

At step 5 press button 1 twice the led will go green
At step 7 press button 1 4 times

When you enter the menu the LED should be green for default.
press 1 + 2 the LED should go orange
press 1 + 2 again and it should go red.

turn ignition off and wait for the chirp or chirps

[nathan818]

right ill try this tomorrow :)

After talking to Mr_TOAD

ignore the chirps,just push the buttons the correct amount of times,i was pushing it once and giving no chrip then on second it gives a chrip,so i was pushing it 6 times instead of 5

just follow the steps exactly and youll be fine :)


Thankyou MR_TOAD

[reevesy_vtr]

the only thing i would say and i know Ian (mr_toad) will back me up with this is that if you dont know what you are doing you can mess up lots of things when playing with the settings on car alarms.

[Claki]

BIG UP MR_TOAD! helped me out when i needed him most!

[Ben121290]

Yes this works, but has taken out my anti hijack feature !!