Refurbing wheels, laquer has run :( what to do?

[CitroenSport]

As title a bit run patch

[marcusd]

wait untill its dry then rub the run down flat again and re lacquar

[mischief]

wait untill its dry then rub the run down flat again and re lacquar
enough said.

[mc_neat]

as said above not with rough paper..anywer between 800 grit and 1200 grit..use plenty of water...careful you dont rub into paint though or uv fucked it lol

[readie]

as sia dabove wet and dry paper very wet a very very fine grade and just take yor time

[mirrorblanks]

you don't need to re lacquer

wait til its dried, use 1800-2000 grit wet and dry and wet sand down the runs and then machine polish

[hammy105]

as said wait til dry, but dnt use 800 as chances are you will go straight through the paint too. Use some 1800, or 2000 wet and dry, and plenty of water, and just sand away but keep checking the depth of the sanding level so you dont go through the paint too.

[mc_neat]

i usualy use 800 depending on how thick the run is..cuts through it quicker then use a higher grade to smooth it off at the end and then machine polish..if uve got a thick ass run ul be ther all day rubbing it down with 1800..also heard if you have a big thick run then wait till half dried and shave it off with razor then wet and dry it..havent tried tht yet tho lol