Fcs prep!

[welshy23]

So anyways was going to buy clay but thought nah im on a budget and i CBA to spend £30 on some clay even though i know it would make the car alot better but without a machine polisher i thought theres no real point and did it the ole faithful way polish by hand. Took a life time, but its done then i waxed it with some dodo juice! and whacked her in the oven for a 24hour roast and volia it will be done. Then the second coat in the morn then alot of QD to sparkle and shine! Heres a picture of it in the oven.

http://i1009.photobucket.com/albums/af218/Welshydavies23/P100610_1312_01.jpg
http://i1009.photobucket.com/albums/af218/Welshydavies23/P100610_1312.jpg
http://i1009.photobucket.com/albums/af218/Welshydavies23/P100610_1311.jpg

[saxovtsmad]

i want your oven mate

[SnaRe]

i want your oven mate

Am I missing something or are you talking like an actual oven?

[welshy23]

i want your oven mate

Am I missing something or are you talking like an actual oven?

nah its like a joke, my mate was like whack it in the oven then! so i though it would be funny to say it on here :D. Cos im going to leave the wax on over night like a slow roast ;)

[Morgan_VTR]

nice mate, wish I had some decent whore tools. You have a massive strap-on compared! Is it the purple haze your using?

[Meto]

Did you pre heat the oven to gas mark 7/200C? If not the consequences can be disastrous.

[SnaRe]

LOL. I see. I'm such a douche. Never seen anyone leave wax on overnight then buff off. Assuming it's harder to buff? Gives better protection? 21questions. ^_^

[welshy23]

nice mate, wish I had some decent whore tools. You have a massive strap-on compared! Is it the purple haze your using?

nah its light fantastic i cba to use the other stuff i wanted my car to smell like popcorn :P

[welshy23]

LOL. I see. I'm such a douche. Never seen anyone leave wax on overnight then buff off. Assuming it's harder to buff? Gives better protection? 21questions. ^_^

no idea :D im guessing it'll be fine :D :S we'll find out tomorrow, i think it like goes hard then the excess just wipes off really easy i just went to check on it and i touched a bit and it wiped off pretty easy. Im sure James or P90 will read it and tell me if im doing it wrong :P

[welshy23]

Did you pre heat the oven to gas mark 7/200C? If not the consequences can be disastrous.

nah thats to high mate, its only a slow roast 150 at the most!

[Meto]

nah thats to high mate, its only a slow roast 150 at the most!

Haha, was only pulling your leg mate :oops:

You've got good attention to detail by doing behind the number plates!

[nicole_]

i thought it was matt black for a minuite lol
my bfs oven pisses all over your oven :p
http://i711.photobucket.com/albums/ww111/lilnic16/SL270108.jpg
the blobs are my car, not allowed to see it yet :D

[adamm]

how come you leave the wax on? is it good to do it like that with the dodo juice?
^^^ whaaat wish i had a garage like that lol

[welshy23]

i thought it was matt black for a minuite lol
my bfs oven pisses all over your oven :p
http://i711.photobucket.com/albums/ww111/lilnic16/SL270108.jpg
the blobs are my car, not allowed to see it yet :D

LOL looks like the biggest blog has a adick lol

how come you leave the wax on? is it good to do it like that with the dodo juice?
^^^ whaaat wish i had a garage like that lol

Ermm no idea mate, i though im not using it till tomorrow so might aswwell wax it and leave it over night :S
haha maybe it works?! You'll find out at FCS lol

[J222JRA]

IMO Welshy you are applying the wax way too thick.

[Aly]

IMO Welshy you are applying the wax way too thick.

Got to agree with this tbh.
It should be a glaze not a smear.

[welshy23]

IMO Welshy you are applying the wax way too thick.

Got to agree with this tbh.
It should be a glaze not a smear.

yeh i know guys :y: just been out there getting it off has taken me 45 mins! tough but it came out okay :y:. Live and learn!

[_saxo69]

i did this to my old cilo before i got my vtr, left wax on over a night and it came out looking mint!

[J222JRA]

Depends on the wax..........the recommended curing time on most dodo waxes is like 30 minutes.

Take victoria red wax as another example.....there is no cure time.....once applied buff straight off and the results that gives are insane.

Most of the time leaving a wax on for 24 hours just makes it harder to buff.

Thats my opinion anyway.

[welshy23]

Depends on the wax..........the recommended curing time on most dodo waxes is like 30 minutes.

Take victoria red wax as another example.....there is no cure time.....once applied buff straight off and the results that gives are insane.

Most of the time leaving a wax on for 24 hours just makes it harder to buff.

Thats my opinion anyway.

This mans statment is/would be true if i left it LOL! Saviour.

[CHIP]

LOL looks like the biggest blog has a adick lol

Might be Ben chasing after Nicole with his willy out?

[welshy23]

Might be Ben chasing after Nicole with his willy out?

probally.

[adamm]

Depends on the wax..........the recommended curing time on most dodo waxes is like 30 minutes.

Take victoria red wax as another example.....there is no cure time.....once applied buff straight off and the results that gives are insane.

Most of the time leaving a wax on for 24 hours just makes it harder to buff.

Thats my opinion anyway.

i love that with my voctorias collectors wax. 1 pannel at a time :) hate having to let it cure because somedays its dries quick and makes hard work buffing off.
i take it still does its job if you let it cure for that long then?

[welshy23]

i love that with my voctorias collectors wax. 1 pannel at a time :) hate having to let it cure because somedays its dries quick and makes hard work buffing off.
i take it still does its job if you let it cure for that long then?

i left it for about 8 hours, still was fine, just a bit tough to scrub off.

[chris205]

A lot of waxes sweat after they've been buffed off so its always good to give it a go over with a microfiber an hour or so two after you've buffed it off, zymol tends to do this a lot

[TypeRDavid]

Just do the finger smear test to see if its ready to buff, job done.

[readie]

i wish my garage was in a fit state to put a car in! haha and i find if left over an hour it has no better results apart from being harder to get off lol had to use a mates electric buffer last time i left it for a day or so