Remote central locking (HAWK)

[DANKZii]

Hi,
Iv just bought a Hawk central locking system clicky (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330444632948&ssPageName=STRK:MEWNX:IT), however when coming to fit it am having a few problems.
Has anyone had experience fitting this/other systems, that could give me any advice?
Cheers.

[curt]

thats what i have got .. i will take some pics of my bodge :D didnt bother making holes and mounting the bolox that came with it lol :D i will go take some pics in a bit :D

[DANKZii]

That would be brilliant mate.
Iv noticed theres a few holes in the door i could use.
Where did you run your wires and stuff?
Cheers.

[curt]

i ran the wires through the doors where all the speaker wire is and that.. was a job and a half but it worked :D i put the little box under neath the dash bord by the bonnet catch :D and ran the live and negetive through the little grommet behind the brake cylender thing underneath the bonnet :D

[DANKZii]

Ahh same as id looked at, cheers fella.
Those pics would be lovely when you get chance, as i still cant work out what im doing wrong!

[curt]

okay mate be back in about 15 mins with pics :D

[DANKZii]

Thanks fella.
That would be awesome.

[curt]

right this is the passenger door ...
at the bottom left hand side there should be a small hole ... mount the motor with the screw in the top hole on the motor
http://i843.photobucket.com/albums/zz351/Curtisprovins/DSC02386.jpg
http://i843.photobucket.com/albums/zz351/Curtisprovins/DSC02388.jpg
connect it all up and feed the wires through this ....
http://i843.photobucket.com/albums/zz351/Curtisprovins/DSC02390.jpg
then mount the box somewhere in the passenger foot well
http://i843.photobucket.com/albums/zz351/Curtisprovins/DSC02391.jpg
i havent mounted mine properly yet i need to find a good place
then your door should look like this
http://i843.photobucket.com/albums/zz351/Curtisprovins/DSC02389.jpg
the rest is easy .. you can take the door pins out and connect the little block on to it then mount at a fix it back in place but you need to make sur you put it back properly .. i hope that is okay for you .. the drivers door there should be some little clip things that you "mount" somewhere but just screw a screw in it then put it in one of the holes and it works i will try and take pics at some point.

Cheers Curt

[jinx]

I got one of these installed to my old pug, quite easy to install.

[DANKZii]

Can you get pictures of the bent metal rod and where that is?
Also, how the motor is mounted without the soundproofing?
Iv done mine totally differently to that :/
Cheers.

[curt]

yep i can try will take it apart again tomorrow :D

[DANKZii]

Cheers buddy.
The bit im unsure of is where the rod from the motor is attached, is it to the metal rod from the bottom of the door pins?
and then the motor is attached to the bottom of the door?
I think i attached mine up as more of a door popper, rather than a central locking system.
Cheers,

[curt]

ahh okay well i am charging the batterys for the camara and i should be able to get pics :D. but basicly ... dont bend the rods that came with the kit.. hook one of the rods on to the motor on the passenger door (should have two wires) secure the motor as shown in the picture. find the door pin and take a picture so you know what it enters and how it goes back together remove the rod from the motor and revome the door pin use the connecting blocks to secure the two together i used some electrical tape too put the rod back on the motor connect the door pin back together connect it all up and away you go ..

[DANKZii]

Cheers pal,
I edned up bending them, but have got them to work.
I was connecting them to the wrong piece :(
Cheers for all your help pal, much aprechiated.

[ryza]

if you allready have central locking do you need the solnoids?
i wouldn't of thought you would but would like to hear from other people :y:

[curt]

no not in theory but you have to buy a different kit that connects to the alarm module or non remote locking unit which acts as a reciever for the locking solinoids aleady in the doors.. the hawk one is about 10 pounds i think .

[ryza]

i dont suppose u can find us a link? because i cant :/
and thanks for the info :y:

[curt]

http://cgi.ebay.co.uk/UNIVERSAL-REMOTE-CENTRAL-LOCKING-UPGRADE-KIT-2010-MODEL-/230451013865?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35a7f368e9
http://cgi.ebay.co.uk/Car-Remote-Control-Keyless-Door-Central-Locking-Kit-/270602409852?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f0129177c


There you go mate there is two on ebay after a quick scan i cant find the hawk one but they do have some good alarms that you can hook up to your own non central locking that will convert it :D here is there website

http://www.hawkcaralarm.com/

[reevesy_vtr]

if you have central locking you dont need a motor in the drivers door. the shitroen system is controled lock by a neg pulse and unlocked by a neg pulse the wires in the car that you are looking for are thi blue and gray.

[Morgiee]

Hi,
Iv just bought a Hawk central locking system clicky (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330444632948&ssPageName=STRK:MEWNX:IT), however when coming to fit it am having a few problems.
Has anyone had experience fitting this/other systems, that could give me any advice?
Cheers.

Hi mate i was looking to buy the same system. If you get into contact with the company they will draw out a wiring diagram for you :y:

[GTuff]

i want to put remoted centarl locking on mine is it hard

[ryza]

http://cgi.ebay.co.uk/UNIVERSAL-REMOTE-CENTRAL-LOCKING-UPGRADE-KIT-2010-MODEL-/230451013865?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item35a7f368e9
http://cgi.ebay.co.uk/Car-Remote-Control-Keyless-Door-Central-Locking-Kit-/270602409852?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3f0129177c


There you go mate there is two on ebay after a quick scan i cant find the hawk one but they do have some good alarms that you can hook up to your own non central locking that will convert it :D here is there website

http://www.hawkcaralarm.com/

cheers for the info mate :y: the first one looks smart,
anyone know if this is any good?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190336910874&ssPageName=STRK:MEWAX:IT

[curt]

looks okay but saxos already have an imbobaliser so that would judt defeat the object of it and also the saxo one will be better .. i would go for the first link that i gave ya .. but you can never be to sure on the quality of the product .. that is what i paid for mine and i cant really fault it .. just be careful of the antenas on the .. the come out and then they dont work ..