106 gearbox

[sax0gal]

hi guys just wondering if anyone had ever fitted a 106 rallye gearbox to their vtr and if so is it just the box or will i need different driveshafts,mounts etc
also would this be the best box for a quarter mile car or could anyone recommend another one? cheers

[AndySAXO]

should fit ok.... will work better than a vtr box for 1/4!!! but top end will go

[sax0gal]

ok cheers all driveshafts should fit ok then? also does a fast road clutch really any better or should i stick to a standard one and should i get a rallye one or a vtr one?

[Mikol]

VTR 200mm clutch.

The S1 rallye one is smaller (180mm), S2 Rallye uses a 200mm one but it's dependant on the flywheel on YOUR engine, not the one the box came from.

You want a 200mm clutch.

[sax0gal]

ok cheers i take it that is the standard size vtr clutch would this be ok?

http://cgi.ebay.co.uk/CITROEN-SAXO-VTS-VTR-FAST-ROAD-CLUTCH-/260644332761?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3caf9ce4d9

and all the drive shafts and mounts etc would fit ok am thinking of fitting an s1 box

[Morgzc]

ok cheers i take it that is the standard size vtr clutch would this be ok?

http://cgi.ebay.co.uk/CITROEN-SAXO-VTS-VTR-FAST-ROAD-CLUTCH-/260644332761?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3caf9ce4d9

and all the drive shafts and mounts etc would fit ok am thinking of fitting an s1 box

106 is a saxo so all the mounting points for the box are the same. The gearbox end of driveshafts are all identical so will fit fine.