VTR Valve Clearances

[Tim_VTR]

Does anyone know what valve clearances suit a KT11 Kent cam, just fitted one with the standard clearance of 0.20mm inlet and 0.40mm exhaust and it doesn't appear to be running right, won't idle at all, misfires slightly under mid throttle but ok under full throttle. Any thoughts?

[Tim_VTR]

Can anyone help?

[NFS]

Email the suppleir and have you timed it up right?
i havnt heard of the KT11 is it a wild cam if so you will need a remap or retard the timing but thats only if its a wild cam

[Liam_]

What have you done as regards the timing - using the standard pulley and locking holes?

According to their website, clearances for the PT11 are 0.25mm for inlet and exhaust.

Set with a cold engine. Don't forget that cylinder 1 is at the gearbox side of the engine. :)