Log in

View Full Version : vt kit on a vsx


Jarveyboi
22nd October 2010, 14:17
hey peoples, im new to the mod scene and was wondering how hard it is to fit a ful vt kit to a mk1 vsx 1.4 i have no knoledge of how to do it and wondering if it was simple enough to do it myself or will i have to get a pro to do it for me?
cheers peoples

Morgzc
22nd October 2010, 14:49
Search button and stickies, they are there for your bennifit.
http://www.saxperience.com/forum/showthread.php?t=58505

Also there is already a thread on this just two down from yours...
http://www.saxperience.com/forum/showthread.php?t=58505

Jarveyboi
22nd October 2010, 19:50
I don't want to know how to do it I want to know
If it is easy to do it as I have no idea if I know
It's going to be easy enough I'll do it. Has any that didn't have a clue
Done this and it turned out alright?
Also I can't find a guide or any help for a vsx
Are they tr same as other Saxo mk1's?

Jarveyboi
22nd October 2010, 19:51
I don't want to know how to do it I want to know
If it is easy to do it as I have no idea if I know
It's going to be easy enough I'll do it. Has any that didn't have a clue
Done this and it turned out alright?
Also I can't find a guide or any help for a vsx
Are they tr same as other Saxo mk1's?

squarepants
22nd October 2010, 20:08
i fitted a vtr kit on my old vsx, pritty simple, apart from the front and rear archs. (vsx beeing a flat arch) the rear archs will need cutting out to make the round-ish. (hold up a vtr rear arch plastic over the standard back arch and you will see what needs cutting out)

fronts are simlair. vtr front wings have cut outs so the plastic archs can be fitted. ( but the wings can be bashed in with a hammer and the plastic archs stuck on over the top) thats what i did :y:

the front and rear bumpers are a straight swap, but you will have no front toe eye!

door trims basicially just clip on, need abit of sticking iirc

side skirts will need sticking on

and spoiler can be stuck on.

i used tigerseal to stick all my kit on with.

dan

Jarveyboi
22nd October 2010, 22:41
cheers mate so basicly its rather easy just need a lil know how? can the from panels be replaced with vt ones so the arches fit perfectly?

squarepants
22nd October 2010, 22:49
yeh, front wings can be straight swapped :)

Jarveyboi
23rd October 2010, 11:49
Cheers guys thanks for the help I'll give it a go.