Morettes inner lamp cold air feed size & where to buy?

[tommy_g666]

Ive just fitted some morettes to my mk2 and i want to run my cold air feed to the inner lamp hole. Ive measured it and its roughly 110mm. The cold air feed pipe ive got for my bmc is 70mm. If anybody know where i can buy a speaker port or a trumpet to fit and also the reducers ide need to go from 110mm to 70mm i would be greatfull

Thanks tommy

[Sam]

I got mine on Demon Tweeks, The pipercross set, it comes with 2 trumpet type things.

[tommy_g666]

do you know what the diameter of the flex piping was?

[tommy_g666]

Found this for the inlet (I would get it in black)...
http://www.demon-tweeks.co.uk/Performance/Air_Filters_&_Accessories/Ducts_&_Ducting_Hose/Revotec_Anodised_Aluminium_Air_Inlets/1814/3552

102mm bore is the biggest they do but im guessing the flange/flare on the inlet/trumpet will fill the space so it wont leave a gap. So would a 89mm bore one fill the whole in the morette? Thats the biggest size i can have so i can have the right size reducer to fit my 70mm flex pipe. What would be best to use to secure it to the morette?

They also do a gauze which ide also get in black...
http://www.demon-tweeks.co.uk/Performance/Air_Filters_&_Accessories/Ducts_&_Ducting_Hose/Revotec_Air_Inlet_Gauze/1814/3553

[Sam]

http://www.demon-tweeks.co.uk/Performance/Air_Filters_&_Accessories/Ducts_&_Ducting_Hose/Pipercross_Cold_Air_Feed/1814/3474

This is thr one i got. Not sure on size i just measures the size of the airbox inlet

[tommy_g666]

65mm i think would of been the one.

Im going to order the 63mm revotec inlet and gauze tomorow. With the flange it measures across at 110mm so it should be bang on. I will let you know how i get on :y: