will it fit

[alendil]

just wondering
is standart vts/r wishbone going to fit to 1.1 saxo.
is there much defrienc betwen them.

[TomT]

Anything will fit with a good bit of lube,

But seriously, No I don't think they're the same.

Not too sure though, just trying you help you out while everyone else is asleep haha, I'm sure someone will be along in the morning that knows for deffo.

[MartinDines]

Anything will fit with a good bit of lube,
hahaaa

[RustySkull]

No I think you need a 1.1 Wishbone, unless it's free It'd get a 1.1 part :)

[willsy]

Officially It will fit as the chassis is the same

however if you're fitting it you'll have to ditch the 1.1 anti roll bar which bolts onto the original 1.1 wishbone.

[alendil]

ok and is vtr/s antirolbar will fit 1.1

and i did try lots of lube and efects are owsom

[saxo-parts]

if you really feel the need to fit the VT wishbone, you'll need to fit VTR anti rollbar, VT struts as the anti roll bar bolts to the actual strut on a VT rather then the wishbone on a 1.1 and a pair of VT drop links, in short, just get the correct part

[alendil]

its just idea becouse my suspension is not best condition
i was thinking about bying all bits new bushes etc put every think together de rust and paint and then just swap to my 1.1.
there is some litle anoying ratles and bits. bushes are bit nacked and every think is very rusty.