Fog wiring help!?

[tomsmarty]

I bought some fog lights a while ago and have never got around to putting them in, not sure whether to put them in now. Shall i put them in or leave them off? Was planning on fitting strobes into them?

http://i882.photobucket.com/albums/ac28/tomsmarty1/Saxo/05102010015.jpg

http://i882.photobucket.com/albums/ac28/tomsmarty1/Saxo/SDC10827.jpg

http://i882.photobucket.com/albums/ac28/tomsmarty1/Saxo/SDC10824.jpg

Cheers Tom

[cloke]

Why have you put a link to "post a new thread" ? :S

[tomsmarty]

Why have you put a link to "post a new thread" ? :S

Pasted what i thought was a image code but wasn't, edited it now :)

[cloke]

Ahh right. I'd fit em if I was you, looks better than standard. But you'd need new wiper stalks (ones with fog light switches) and you'd need the wiring loom as well. You could probs buy a bumper with fogs fitted that Comes with a loom then you'd only need the stalk.

[tomsmarty]

When I looked into doing this before I did a little research and took the car apart, found thats the 'eastcoast' model has the loom that sits behind the P/S headlight and comes out by the steering wheel. God knows why citreon just didnt fit the fogs?

[tomsmarty]

But yeah will need the stalk, thanks for the advice by the way :)

[cloke]

When I looked into doing this before I did a little research and took the car apart, found thats the 'eastcoast' model has the loom that sits behind the P/S headlight and comes out by the steering wheel. God knows why citreon just didnt fit the fogs?

Haha really? Thats the French for you lol

[tomsmarty]

Haha really? Thats the French for you lol

Sure is, can afford to put the loom in but not the actually fogs. Smart or what :hug:

[cloke]

Sure is, can afford to put the loom in but not the actually fogs. Smart or what :hug:

Haha typical lol. Then yeah, if I was you I'd definitely fit em, cos Aslong as you cut the bumper well then wouldn't take too much time to fit em.

[tomsmarty]

Haha typical lol. Then yeah, if I was you I'd definitely fit em, cos Aslong as you cut the bumper well then wouldn't take too much time to fit em.

Yeah wont take long as the eastcoast bumper also has the bolt holes for the fog brackets to go into aswell lol. Cheers mate :)

[cloke]

No problem mate, make sure you post pics once done bud :y:

[tomsmarty]

No problem mate, make sure you post pics once done bud :y:

Will do!

[tomsmarty]

Spraying the inserts of the fogs before I fit them, do I need to use primer or will it be ok just spraying the black spray straight on?

[LVC]

Fit them :y:

Primer first if you like - if you spray well then you probably couldn't tell the difference without the primer though - I don't bother and I'm no expert sprayer but the finished effect is fine IMO.

[tomsmarty]

Recon im gonna give it a go without primer :) Thanks for the help will get pictures on once iv done spraying on my progress thread http://www.saxperience.com/forum/showthread.php?t=356101

[tomsmarty]

No point me making a new thread to ask this so I will add it onto here.

Fitting fogs into my saxo, going to need to get the stalk for the wiring loom to plug into. Had a look on ebay and they are £55+ postage at the cheapest! Was wondering if anyone knew a way of wiring it to a spare button on the dash like the hazard one?

Is it actually possible? Thanks Tom..............

[piranhamatt]

scrapyard for stalk?

[tomsmarty]

scrapyard for stalk?

Havent looked yet, they will still probably want a fair bit for it :\

[tomsmarty]

Need to get this sorted, anyone know on here before I post on the problems section?

[tomsmarty]

Right, got the stalk finally, plugged the fogs into the loom behind the P/S headlight. Stalk plugged in. Still doesnt work?

Any ideas? HELP! :(

[seisporting]

Where does the wiring go to from the fogs? Is there an inline relay of a fuse in the fuse box where the wiring goes to that will need to be put in?
The bulbs work dont they ;)

[tomsmarty]

Where does the wiring go to from the fogs? Is there an inline relay of a fuse in the fuse box where the wiring goes to that will need to be put in?
The bulbs work dont they ;)

From the fogs into the fog loom behind the headlight, not sure which fuse i would need to put in or if it already has one? Havent got a manual for the car so i cant find out :( the bulbs work yes lol

[seisporting]

I'd check for you in the manual but i dont have one either sorry.

[tomsmarty]

I'd check for you in the manual but i dont have one either sorry.

Haha no worries mate :) Thanks anyway.

[seisporting]

Fuse 6 15 amp engine bay fuse box.
didnt think to look in the actual Citroen book!

[tomsmarty]

Fuse 6 15 amp engine bay fuse box.
didnt think to look in the actual Citroen book!

Thanks! Il have a look now :)

[tomsmarty]

Got no fuse in the 6 slot but got one in the 10 slot. Anyone know what fuse i will need to put into which slot?

[seisporting]

Is there contacts in fuse 6 hole, i'd try one in there.

[tomsmarty]

What amp fuse shall i put in?

[seisporting]

15 amps

[tomsmarty]

Thanks for the help mate, will try and find one now and let you know

[seisporting]

Ok hope it works for you!

[tomsmarty]

no luck :\ Getting really annoying now lol

[tomsmarty]

Anyone got any ideas?

[seisporting]

Are you putting the fog lights on when the sidelights/headlamps are on?
If so when you turn them on is there power to the contacts in the fuse box?

[tomsmarty]

Yeah iv got the lights on, um i havent got anything to test voltage :\ il have a search for one a min.

[tomsmarty]

Havent got one :\ will borrow one and continue tomorrow once the hangover has worn off.

Thanks again :)

[merc2546]

put them in and wire it to high beam

[tomsmarty]

Would have to find where the fog loom comes out to be able to do that. Havent got a clue where the fog loom goes from behind the headlight.

[merc2546]

if u ent got a fog lome some wire bridged off the head lights would work that wat iam going to do after its mot

[tomsmarty]

I have the loom but it's going to be hard following it all the way behind the dash, don't want them connected to the full beam tbh as if it gets that foggy I need the fogs on I won't want my full beam on as the fog will dassle