Purity Detailing:- 206 GTI 180 TO BE WON (PRIZE DRAW AT FCS)

[Purity]

Work Commencing 10/01/2011...........

This is going to be the Car that will be won At this years French Car Show (FCS)

See Thread for details of competition:-
http://www.206info.co.uk/Forums/viewtopic/p=272651.html#272651

Someone WILL Win This CAR!!!

Riite, all todays work, Appologies for not getting any actually was pictures up, as it was absolutly belting it down when i was doing it and i didn;t want to gwt my cammera wet through..

But these are of just after the Snow foam, wash with two bucket method... and then just as i had finished it stopped raining, fortuntly so i could dry it off....

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Before1.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Before2.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Before3.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Before4.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Before5.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Prep2.jpg




Full Car Prep, All bits of trim and windows that cannot be corrected at this stage: -

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Prep3.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Prep4.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Prep5.jpg



All Vehicle Was Fully Rubbed Down with Clay, This is to ensure the Surface is 100% decotaminated prior to Machine Polishing: -

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/ClayBar.jpg


Starting with just the Bonnet area, and the bottom half at that i started to measure the paint with the Depth Guage: -

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/PaintDepth.jpg


As can be Seen the Reading is the Bigger Figure, and the little number in the corner is the difference between the lowest and highest Areas of the bonnet: -

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Readings.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/Beforepolish.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/MachinePolishing.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/AfterMachinePolishing.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/AfterPolish.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/34Corrected.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/FullyCorrected.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/WingBeofreCorrection.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/WingCorrection.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/WingCorrected1.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/WingAndBonnectCorrected2.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/DoorBeforeCorrection.jpg

http://i269.photobucket.com/albums/jj56/tom_mol69/206%20gti%20180/DoorAfterCorrection.jpg

[TypeRDavid]

HOW MUCH TAPE!! lol

Surely you only need to tape around the edges and not the whole window?

looks okay mate, someones gonna get a nice 206 by the looks of it.

[Purity]

With the amount of wetsanding and machine polishing that is going to be done on this car, the windows need to be fully tapped off... :)

[J222JRA]

Is it me.... or in one pic where your polishing the front wing is the backing plate bigger than the polishing pad??

It may just be me.....not slept much this year.

[TypeRDavid]

With the amount of wetsanding and machine polishing that is going to be done on this car, the windows need to be fully tapped off... :)

??????? Im sorry but why, as long as the edges and creases have been covered then it wont make a bit of difference mate surely? just trying to save you some money on tape lol.

[Purity]

No you are correct mate, the backing pad is bigger on that one shot, with the mad curves on that wing i needed to use the smaller pad.... but with that backing pad it is perfectly fine to use.. just got to be careful not to catch the backing plate on the body work.....


Could someone tell me who the best Moderator is to contact in order to advertise this competition.... as this car will be givin away at FCS 2011

[Purity]

??????? Im sorry but why, as long as the edges and creases have been covered then it wont make a bit of difference mate surely? just trying to save you some money on tape lol.

If you keep an eye on this thread my man... u will soon see why ... wtach this space throughout the next few days :y:

[TypeRDavid]

If you keep an eye on this thread my man... u will soon see why ... wtach this space throughout the next few days :y:

Will do mate, now youve got me curious;)

[Purity]

Good Good... You wanting to enter the competiton?? :D

[TypeRDavid]

Good Good... You wanting to enter the competiton?? :D

Errr no i'll stick with the Datsun lol!

[Purity]

Can always win it and sell it, put more money toward the Datsun ;)

[TypeRDavid]

Can always win it and sell it, put more money toward the Datsun ;)

Now theres a thought !;)

[Purity]

I am sure over £3000 want go a miss to anybody... dont forget once i am finished with it, it will be worth every single penny of that money..... And your datsun would be all nice and shiney too ... everybody wins you see

[Aly]

Looks nice but not my cup of tea

[Rodney]

Dont fancy polishing my car do you? ;)

[Purity]

Dont fancy polishing my car do you? ;)

Enter the competition mate, thats what it is all about... Get yourself booked in for a detail and you will be entered into the prize draw: -

http://www.206info.co.uk/Forums/viewtopic/t=22030/start=0.html :y:

[Robtur]

With the amount of wetsanding and machine polishing that is going to be done on this car, the windows need to be fully tapped off... :)

Why are you then correcting it with a DA if you are going to wetsand it ?

Also do you have a Lottery operating licence for this raffle as technically this is for private gain and to make profiit ? and if so can you provide details of this licence ?

Another comment made about the backing plate being too big, i might be confused, but is that common practice ?

are you able to post up which dates have been taken, so we can choose a date ? (with the limited time for the details to be carried out)

and finally, how far are you willing to travel to carry out a detail or would we need to come to you ?

Thanks

Rob

[jdizzy]

^^^ always one...........

[Purity]

1) This is purely just a little bit of fun, and no i don’t have a lottery license. If i have to sell the car for a Penny at the end i am sure the winner will pay 1p to take the car away. If this by-passes the need for a license... And please please don't go on about how u technically need a license to do a competition..... Technically you need to be a police man with blues and twos on to go over the speed limit, but does that mean you haven't ever gone over the limit????... i think not..

I am not having a dig at you mate lol, cos technically yes you do need all that, but this competition will make someone very happy. And i think in these tough economic times it is a brilliant idea because it is just win win win for everybody. You will get your car professionally detailed and also a very good chance to win a fantastic car.

Please ask me how often opportunities like this come up from other companies?? Never because they just like taking ALLLLL the profits, i am simply trying to give something back for a change. So please don't try and put downers on it for everybody.

2) All cars must be dropped off at Purity Detailing, which is in Bradford, West Yorkshire.

Link to competition : -

http://www.206info.co.uk/Forums/viewtopic/t=23120.html

Please PM me or call 07515 679615 for any info ppl :)


3) Dates for comp are from 10/01/2011 till 01/05/2011

4) I should of changed the backing plate also, but as I was only messing about with the polishing, I didn’t see the need.


And seriously I aint having a go at you fela, just that on every single forum I have posted on, certain individuals just keep trying to jeopardise it, but the majority of people on the forums would love to see the competition go ahead. So all the MODS are letting it run as they love the idea.

I hope this answers all your questions mate.