PDA

View Full Version : Fault code P0170

DusheR
15th January 2011, 12:58
Can anyone tell me what the above fault code means? Cheers
Saxguy
15th January 2011, 18:54
fuel trim malfunction
Liam_
15th January 2011, 19:13
Chek your lambda sensor before the CAT.
Saxguy
15th January 2011, 19:16
And maybe also airleaks in the inlet.
DusheR
16th January 2011, 00:45
Chek your lambda sensor before the CAT.

And maybe also airleaks in the inlet.

Cheers lads these are the two things I was going to check. Cars coming off the road in a bit anyways. Hopefully get all the problems sorted then bang 75bhp of nitrous in the mix :y:
philliantkr
16th January 2011, 01:39
Intake leak, AIR system, fuel pressure/pump, injectors, EVAP canister purge valve, HO2S. According to Autodata
DusheR
16th January 2011, 02:24
Intake leak, AIR system, fuel pressure/pump, injectors, EVAP canister purge valve, HO2S. According to Autodata

Very vague code then :n:
DusheR
17th January 2011, 20:44
Well I knew I had two bolts missing on the inlet. Now the problem is trying to put the bolts in with the engine in place.

Its the two bolts facing upwards at the back on the inlet. Any ideas?
williamsvts
22nd January 2011, 05:25
just put them in and use a short allen key. also, you dont have the air pump fitted as your car isnt a vts so that may bring that code up aswell. got a working ecu yet?