Log in

View Full Version : Furio interior changing...

Westgarth
20th January 2011, 14:21
Hello, i have a furio saxo with all the standard seats and most thing different colours and YELLOW!! i have already changed the yellow gear knob to a standard black one and also taken the yellow balls of the top of the door locks... now on to the different coloured seat belts. Is it easy to take them out without taking the whole inside of the car apart? as i really carnt stand them any longer :( help needed thanks
SAM-S44MDS-
20th January 2011, 14:23
Seat belts are easy to change mate :y:
Try and get a GTi half leather interior in to replace the shitty seats lol
chinkostu
20th January 2011, 14:24
i personally liked them in my east coast. gave it character :(
Rodney
20th January 2011, 14:34
Seat belts are easy to change mate :y:
Try and get a GTi half leather interior in to replace the shitty seats lol

Leathers :y:
http://i1186.photobucket.com/albums/z361/Pocoloco22/VTS1.jpg
stevo67
20th January 2011, 19:34
17mm socket for the seatbelt blots.

Steve.
Westgarth
20th January 2011, 19:55
now need to find some cheapish leathers near Yorkshire :( will I have to take rear door cards out and seats for seatbelts? thanks for all your help
stevo67
20th January 2011, 20:39
now need to find some cheapish leathers near Yorkshire :( will I have to take rear door cards out and seats for seatbelts? thanks for all your help

Makes the job easier if you do mate.:y:

Steve.:drink:
Westgarth
20th January 2011, 20:41
Ballake :( do they just unclip out?
stevo67
20th January 2011, 20:58
The 1/4 panel trims you open the rear 1/4 window push up the rubber seal then gently work round the 1/4 panel pulling it away.Good luck with putting that trim back(all i WILL say is plently of swearing will happen)

Steve.
Westgarth
20th January 2011, 21:01
haha thanks :) I had trubble with my Corsa ones, one side ended not siting in right lol
merc2546
20th January 2011, 21:02
keep the seats in it is diiferent
SAM-S44MDS-
20th January 2011, 21:03
The 1/4 panel trims you open the rear 1/4 window push up the rubber seal then gently work round the 1/4 panel pulling it away.Good luck with putting that trim back(all i WILL say is plently of swearing will happen)

Steve.

I never had any issues with the first time I did them, went straight on no probs.
Second time my dad come out to see what all the swearing at stressing was about. Proper lost my rag with them :homme: lol