PDA

View Full Version : Boot opener


langy88
6th February 2011, 22:24
Does anyone have a wireing diagram for wiring a boot release to the rear washer jet button on the left stork?

I know there's a how to on wiring it up using the button but the button I've got with the kit is really ugly

Cheers

wassy78
6th February 2011, 23:58
i wired my rear boot to the rear wiper so when you turned the stalk it opens

langy88
7th February 2011, 00:07
Which wires did you splice into? Where they near the stalk or where the wiper motor is?

wassy78
7th February 2011, 00:12
where the wiper is my wire was white so ground the door popper and the red put to the white .....when you want to open your boot make sure you move stalk forward and back or you will burn it out if you leave it

sliderz
7th February 2011, 00:22
i wired my rear boot to the rear wiper so when you turned the stalk it opens

same as mine

saxorino
7th February 2011, 19:30
http://img140.imageshack.us/img140/5788/sam0061s.jpg
That picture is out of the max power saxo haynes manual, see if that helps.