16v-Ax
2nd March 2011, 10:13
Hi guys, new to the forum as ive bought a N plate xsi 1.6. Ive since removed the engine and tonight i fitted a 16v engine. I had already labelled as many wires as i could and as i was finishing up for the night i thought id quickly try and start it.
So i connected the obvious starter +ve feed and a wire that leads to the coil aswell as the lambda. The other wires i have are things like coolant temp, oil pressure, rev counter etc so i never connected any of them as it should start without!?
As i switched ignition on, the fuel pump didnt prime, nor does it run whilst cranking. I therefore fed it direct so the pump is puming continuous and try cranking again. Still no offer.
What compulsary wires run through the plug at the nearside wing that must be connected to run?
None of my wires appear to be ecu power feeds etc.. Just ecu outputs.
Any help much appreciated and a paypal pint to anyone with info leading to my car firing up!!!
So i connected the obvious starter +ve feed and a wire that leads to the coil aswell as the lambda. The other wires i have are things like coolant temp, oil pressure, rev counter etc so i never connected any of them as it should start without!?
As i switched ignition on, the fuel pump didnt prime, nor does it run whilst cranking. I therefore fed it direct so the pump is puming continuous and try cranking again. Still no offer.
What compulsary wires run through the plug at the nearside wing that must be connected to run?
None of my wires appear to be ecu power feeds etc.. Just ecu outputs.
Any help much appreciated and a paypal pint to anyone with info leading to my car firing up!!!