Log in

View Full Version : Air leak


JAGVTS
2nd March 2011, 13:55
Hi , I have an air leak between the inlet manifold and the tb where they meet U can see the air only at a certain eye level anyone know what the problem is ? Mucho gracias .

Stevo123
2nd March 2011, 14:32
See the air? If there is a visible gap then thats a serious leak! You can make a new gasket from gasket paper or if it is an o-ring seal you will need a new o-ring. You may even get away with tightening the throttle body back up to the manifold. I think they are 6mm hex bolts.

peterabbott33
2nd March 2011, 17:08
buy some instant gasket, lots of different types available but best to go for one that stays flexible once hardened. buy from halfords or any motor factors, about £3 - £5 a tube and is very handy to have

Furio-Gazza
2nd March 2011, 17:10
buy some instant gasket, lots of different types available but best to go for one that stays flexible once hardened. buy from halfords or any motor factors, about £3 - £5 a tube and is very handy to have

.....+1 same happend to me and thats what i did :)

peterabbott33
2nd March 2011, 17:26
.....+1 same happend to me and thats what i did :)

i swear by that stuff, its like gods gift to the motor industry :y: lol

JAGVTS
2nd March 2011, 17:43
See the air? If there is a visible gap then thats a serious leak! You can make a new gasket from gasket paper or if it is an o-ring seal you will need a new o-ring. You may even get away with tightening the throttle body back up to the manifold. I think they are 6mm hex bolts.

Yeah it's like a fine mist steam . Ok I will try that gear sounds rated anymore answers?