PDA

View Full Version : Which one goes where?


Imfromwales
9th June 2006, 14:24
I have taken my centre piece out for a respray. This is the first time i have done it. I have forgotten where these 3plugs go lol - there is 2 grey and 1 black.

http://img139.imageshack.us/img139/1506/dsc00171medium6di.jpg

I am confused as there is 3 plugs but there is only 2 things that make something happen - the hazard lights and the back window de mister. I think the 3rd one might be for indicators but do not have a clue. I think they are for my indicators because i am driving withouht the centre piece in and all plugs hanging out and when i put indicator on it does not flash on my dash - i dont know weather it still flashes on the actual indicators on the outside of the car.

Imfromwales
9th June 2006, 14:25
Any help would be greatley appriciated

Scott
9th June 2006, 14:37
yep one of the plugs is redundant. One is the hazards and thats whats interfering with the indicators,

on the back of the switches there must be a corresponding amount of pins to the wires? Match them that way

failing that just plug a plug in at a time and check its working, probably easiest to start with the hazards

Baz
9th June 2006, 14:42
the black one is your hazard lights, and the bottom grey one is your heated rear window mate

Imfromwales
9th June 2006, 14:42
Right ok then thanks. Il give it a go and post again if i have no luck lol.

Baz
9th June 2006, 14:45
lol, pretty sure that is correct. i have a picture with mine like that, black one had part of the hazard button still on, which was the black one...and the other grey one was heated rear as it was the only one which would reach near the hazard button