Pug 306 seats in a saxo?

[mattmartin]

Hi, anybody know if 306 gti 6 seats will slot straight in a saxo?

[SAXO8VYO]

the back seats i dont have a clue about but
the front seats fit but on the drivers seat on the door side of the seat frame you have to use spacers/washers to make it sit straight that side and other than that they fit but are very wide compared to saxo seats

[mattmartin]

Thanx mate, seen some at a local scrappers in good nick and he only wants £30 for the pair, thought it would be a bit different from the usual 106 gti route!

[Squeak_]

they do fit but as said is is a tight fit

[Kyza]

You need to make custom subframes for them to fit perfectly, or else both front seats will be facing inwards (center of the bonnet) and also at an angle so you will slide to the outside of the car.

Back seats are near impossible to fit without cutting the doorcards etc.

[steviee90]

They fit but its a squeeze , and when you close the door it squashes the leg bolsters. Better trying to find 106 gti leathers if you dont want to ruin your seats.

[pepsimax]

You need to make custom subframes for them to fit perfectly, or else both front seats will be facing inwards (center of the bonnet) and also at an angle so you will slide to the outside of the car.

Back seats are near impossible to fit without cutting the doorcards etc.

Considering that the pedals are pretty much in the middle of the car that makes the 306 perfect for the job, practicality wise lol:y:

[Venns]

I would get the 106 leathers to be safe mate.

[jeffchiz]

my house mate has half leather 306 seats in the front of his, the three door front seats bolt straight in but they are on the piss slightly, BUT the 5 door seats need a custom bracket made up but they sit straight, my mate spent a couple hours at college making up some brackets you just have to sit down with a pen and paper and make some calculations also they aren't that tight like people make out, as you can guess the mounting point of 3 and 5 door seats in 306's are different, hes not having rear seas in his so 5 door ones were perfect for him
http://i359.photobucket.com/albums/oo32/TJW5190/fd437007.jpg

[JoshB]

Used to have them in mine.

http://i415.photobucket.com/albums/pp234/Joshb1984/DSC00084.jpg
http://i415.photobucket.com/albums/pp234/Joshb1984/DSC00094.jpg

As you can see, they were slightly on the piss. The rears fitted, but you couldnt use the standard brackets all, needed to screw them direct to the chassis so no lifting the seats up either.