Nilfisk C110 inlet filter?

[johnr32]

On the instructions it shows a separate filter but I cant seem to find it in the box it came in...anyone else had this experience?

Also one more question. My Autobrite HD foam lance with the kew/alto adaptor doesnt seem to fit flush with the pressure gun attachment.
Am I right that i need this part?
http://www.i4detailing.co.uk/cgi-bin/sh000001.pl?REFPAGE=http%3a%2f%2fwww.i4detailing.c o.uk%2fcgi-bin%2fss000001.pl%3fpage%3dsearch%26SS%3dextender% 26PR%3d-1%26TB%3dA&WD=extend&PN=Foam_Lance_Spares_2.html%23a3_21868632#a3_21868 632

[Peter_D]

That says Page Not Found?

But i'm not sure which bit you mean, but mine fits perfectly with the autobrite lance

And not sure what you mean by the seperate filter bit either?

[johnr32]

link now works, I was told i needed the Snow Foam Gun 1/4" to 1/4" extended connector for the lance to fit properly onto the gun

http://i84.photobucket.com/albums/k3/johnthesifu/14032011607.jpg

As indicated by the red arrow, the lance doesnt hold securely in the gun. It wont go all the way in like the attachments that come with the pressure washer.

[wadoryu]

kew/alto attachment. that is the correct way for it to go in.

[J222JRA]

The lance twists and locks into place.......(if you have the kew alto fitting that is....take a pic of the end fitting you have)
The inlet filter may already be in the machines end fitting.....ive bought alot of c110 machines now and they are always fitted.

[johnr32]

The lance twists and locks into place.......(if you have the kew alto fitting that is....take a pic of the end fitting you have)


A picture can of my adaptor is here, its the kew/alto adaptor:
http://www.saxperience.com/forum/showthread.php?t=367696

Ok, it stays in when its upside down but it doesnt technically "lock" in like the original Nilfisk attachments..

[J222JRA]

It should lock into position.....it just pushes into the end of the gun and twists to lock.

If i was you id connect the water supply and try the machine just pumping water through the foam lance...if it isnt fitted correctly it will piss water everywhere.

[johnr32]

Sorry for being such a noob! Finally got the lance to lock in! just needed a bit more elbow grease than I expected :oops:

[markpitchford]

Sorry for being such a noob! Finally got the lance to lock in! just needed a bit more elbow grease than I expected :oops:

better that, than coming on saying you put more into than needed and you've snapped summat off :A: