how to fit 4*100 on a saxo

[saxo_vtr_53]

found some wheels with 4*100 fitment instead of the saxo 4*108. wat do i have to do to get thm wheels on my saxo VTR??

[Paul]

Buy some with the right stud fitment lol.

You can get them to fit with very expensive spacers, but its really not worth the hassle unless they're very expensive alloys.

It basically means the studs are 100mm apart instead of 108mm apart.

So when you put the wheel on, the holes for your bolts won't line up with the holes on the strut.

[Kyle_G]

just get some adapters priced up

[Paul]

Probably between £100 and £200 for proper ones, remember to check offset aswell.

[Petee]

Buy some with the right stud fitment lol.

You can get them to fit with very expensive spacers, but its really not worth the hassle unless they're very expensive alloys.

It basically means the studs are 100mm apart instead of 108mm apart.

So when you put the wheel on, the holes for your bolts won't line up with the holes on the strut.

+1

Your looking at about £150-200 for proper ones.

[rorz_vts]

there was some in the forsales for £50 on here or rallyereg

[Paul]

They pop up on ebay now and then aswell :P

[rorz_vts]

very true paul :y: i think sophia bush had them thinking back might be worth a pm

[Venns]

I think you can buy adaptor bolts but they are custom made jobbys so will be expensive, i would sell them and get the 4x108s