Need tips and maybe a solution

[citroen_saxo_vtr]

My furio 16v wont run properly its over fueling, Iv replaced the following:
ICV
TPS
air temp sensor
MAP sensor
lambda
coolant temp
regulator
fuel pump
crank seonsor
ecu
injectors
throttle body
coil
plugs

I have had the inlet manifold off completely and put it on all and made sure all gaskets are sealed tight etc and it was a tiny bit better but its still not able to be driven and i really need it on the road asap now. Please give me hints and tips on what else i could try. :panic:

[stuart-h]

Ecu light coming on when the engine is running?

[jimmerblunt]

coilpack??

[citroen_saxo_vtr]

No eml i dont think it works. I have tried another coil thats another to add to the tried list. Keep them coming guess.

[raunchz]

Another thread?

Right 16v injectors?

Shagged Ecu? It definitely a 16v Ecu?

[citroen_saxo_vtr]

Another thread?

Right 16v injectors?

Shagged Ecu? It definitely a 16v Ecu?

Im sick of it. Yeh its 100% 16v ecu and injectors.
Could the relay under the ecu cause it to over fuel? If so would a relay off a 2000 vts be the same? a single plug one.

[raunchz]

Relay shouldn't affect it.

Fueling is controlled by Ecu primarily, which is given information about the mixture from the lambdas.

[citroen_saxo_vtr]

Iv replaced the lambda in the manifold twice but the second lambda is sleeved.

[kristel10589]

Im sick of it. Yeh its 100% 16v ecu and injectors.
Could the relay under the ecu cause it to over fuel? If so would a relay off a 2000 vts be the same? a single plug one.

The relay is eigther on or off, so if the pump is running, then the relay is ok.

You checked lambda fuse in the engine fusebox?