Where to wire sub power wire from battery ?!

[Toz]

Hi all, I've wired many subs and amps before but on my new furio it has a strange battery terminal and doesn't seem possible to add the hoop from the red 12v wire to it in any way ! Please let me know if you know how to bypass this ! Many thanks :y:

[Saxotim]

You can wire it to the small fuse box there ill get u a link.

[Petee]

or you can just stuff it in the little void on the connecter and snap the cover shut :y:

[Saxotim]

http://www.saxperience.com/forum/showthread.php?t=80129 bosh

[Toz]

Wow thanks for the speedy replies guys. Would really be lost without Sax-P haha , thanks again :D

[Stevo123]

Make sure you add a fuse as close to the point of connection as possible fella.

[jeffchiz]

never knew you could wire it to the fuse box lol when i swapped everything over from my mk1 vtr to my mk2 106 i just shoved the round ring connector in to the clamp and it held for months until i swapped it all back over again in to my vtr

[Toz]

Make sure you add a fuse as close to the point of connection as possible fella.

Where abouts dude ?

http://i428.photobucket.com/albums/qq10/neon09/IMG00950-20110413-2140.jpg

bad quality pic lol please explain where :D

[Rudpud]

Take that nut off and stick it on that, then tighten the nut back up

[Stevo123]

Fuse it otherwise yourt car might go up in smoke if it shorts FFS

[Toz]

Fuse it otherwise yourt car might go up in smoke if it shorts FFS

okay thanks

[samburton53]

Personally I'd never wire it to the fusebox, I did mine by clamping the wire onto the battery terminal. Solid as a rock, good connection.

[tisandy]

Personally I'd never wire it to the fusebox, I did mine by clamping the wire onto the battery terminal. Solid as a rock, good connection.

That is how i'de do it also :)

Also makes the engine bay look techie :P

[Saxotim]

Personally I'd never wire it to the fusebox, I did mine by clamping the wire onto the battery terminal. Solid as a rock, good connection.

any reason for that?

looks much neater than having it straight to the pos terminal plus its a direct link to the batt from the nut.

[wingnuts]

or you can just stuff it in the little void on the connecter and snap the cover shut :y:

That's what I did with mine it bends the hoop crimp to the right shape as well for perfect fit