Pro Race 1.2's

[Sutch]

Evening all,
been registered for months and read daily..
great site..anyways, finally i post...

Anyways the porblem, a while ago got some 15" Team Dynamic Pro Race 1.2's [45profile tyres] on E-Bay, pictured on Saco etc
finally got round to fitting them, came with the longer nuts etc, and spacers [in garage will post up size tomorrow]

The fronts fit on fine, no rubbing etc.
But the back when fitted rub quite harshly just on the inside lip of the wheel, not the tyre, i think its on the brake fluid pipe [can get pictures if wanted]

Was just wondering if anyone else faced any problems, and if its a case of getting slightly wider spacers? Just seems weird as have seem them fitted many times and thought it'd be old wheels off, new on

Car. Mk2 Furio, normal Height

long post, but searched an wanted to try get all in one go..

Thanks for any help or for pointing out anything obvious im missing

[Geoff]

post a picture.

[jaybiss]

maybe a diff offset

pics would help

[Scott]

sounds like you need some slightly larger spacers at the back, quite common on the furios and models with drums at the back as they dont stick out quite as far as the brake disc mnodels

[Sutch]

thanks for the help, [will post picture just to check etc]
but that was my only thought, as they were on a VTS hence discs all round as you say.
another quick Q from this.
if i were to get wider spacers on the back is it then ok to continue using the ones i already have on the front [as they fit etc] or is it best for all wheels to be on the same sized spacers for safety/tyre wear etc

[Scott]

should be fine as at the moment you should have a slightl narrower track on the rear

[Sutch]

thanks for the quick reply again.
and cheers for the helpful info