Sub to the battery

[Jonesy26]

Just brought a sub....any ideas where i can feed the wire through to connect it up to the battery? cheers

[Havark]

you need to run the power down the side of the car and the audio down the other side to the amp.

carpet pulls up very easliy! :)

Dont put them on the same side as there will be interference and you dont want that :)

[Jonesy26]

The amp is already built into the sub....so do i just feed the 2 jack plugs down to my head unit and then the power on the other side......only thing i cant find anywhere to feed the wires to the battery. Do i need to drill?

[marcusd]

use the sticky section or use search button question is asked daily. there is a guide with pics.

under pass side dash look up and will see a grommit push wire through there and its in engine bay

[Jonesy26]

ive tried looking and cant find anything... couldnt do me a favour and send me a link to the guide please?

[danny-vts]

http://www.saxperience.com/forum/showthread.php?t=62418

thats the guide

[Jonesy26]

Cheers mate, thats helped alot....Now lets see if it is all going to work. Finger crossed. Ill let you know how i get on :)

[Saxo-KidNI]

My sub and amp were doing my head in to set up until I used the guides on this
now im making afew coins setting up other peoples :)

[Scott]

Instead of pointing them to the FREE advice you took advantage of? Poor show

[Saxo-KidNI]

Instead of pointing them to the FREE advice you took advantage of? Poor show

I dont ask for money..i enjoy wiring them up ..they know i do it free but i do a quick clean job so they always seem to give me something :) ive done 3 people so far and 2 of them give me £5

[pvts]

if the power wire wont go through that grommet, pull out the inner wheel arch and feed the wire through with the rest of them in there dead easy

[Scott]

I was only joking ;):)

[Saxo-KidNI]

I was only joking ;):)

Just Cus you want a free ICE set up ;)

Pmsl

[Derbyshire80]

i got a drill out and went through the fire wall into the footwell took me all of 30 seconds :D

[Scott]

there are a few grommits no need to drill anything. The usual grommit will take 0 guage with a bit of stanley work.

[Derbyshire80]

ive always drilled through the wall in all my cars and popped a grommit on from the tool box just my way off doining it find it easier imo :P