MK1 Throttle Boddied 'S'

[Bensvts]

Thought i would post a few pics up etc as havent got any up yet and car is coming along now.

spec:

engine-

Atpower throttle bodies
Atpower filter
cituning high comp pistons
newmans ph4 cams
Clio 182 injectors
Emerald k6 ECU
New water pump, cambelt kit
New oil pump
New headgasket
Ported and polished head
c2 cam covers
13mocal oil cooler
Heatwrapped SS supersprint mani
Heatwrapped SS decat
Piper SS cat back

Not yet mapped up only running on base map atm need to book it in late this month

transmission-

s2 rallye gearbox
valeo clutch
B&M quickshift
sports gear linkages

suspension-

spax adjustables
Recond rear axle fitted with powerflex bushes
New lower arms with powerflex bushes and groupN rear mounts
Omp lower strut brace
Upper strut brace
Spoox motorsport gearbox mount
Powerflex engine stabiliser
Powerflex ARB bushes

Brakes-

Gti6 front brake setup with drilled and grooved discs and mintex pads painted in ST orange paint
Standard rears with mintex pads
Swampy's braided brake lines front and rear

Exterior-

c2 vtr 16inch wheels in satin black wrapped in toyo proxes t1r's and 20mm spacers on the rear
Smoked headlights and indicators
xenon headlights
Pressed number plates
Orange Tow strap
Small aerial
Removed Rear 16v badges


Interior-

Limited edition Cobra monaco pro's in orange and black
Sparco 3 point harnesses
Genuine Cobra Subframes with runners
Stripped out Rear

http://i1088.photobucket.com/albums/i330/benj30/100A0989.jpg
http://i1088.photobucket.com/albums/i330/benj30/100A0988.jpg

Let me know what you lot think, i have prob forgot some stuff, will add if i remember anything

Enjoy!!!:y:

[Tsaxovts]

looks smart what power is it running ?

[LSOfreak]

we need engine bay pics ;)

[Jay_]

Where are the pics?!?!?!

[rorz_vts]

looks smart what power is it running ?
re-read it mate he said is running on a base mate and needs mapping
we need engine bay pics ;)
This :y:

[Bensvts]

looks smart what power is it running ?

as said up top mate not yet mapped up, going to be done this month with abit of luck. Currently on a base map so it starts and runs fine just not at full potential. But i must say it pulls like a train right the way up the revs, looking forward to when its mapped

[Bensvts]

we need engine bay pics ;)


Thought you might of popped up ;) lol, will get some shortly mate.. need to do a photoshoot really, should do ours together ;)

[Bensvts]

Where are the pics?!?!?!


theres 2 up the top mate, more to come soon

[Bensvts]

What are peoples thoughts on my wheels as well, they look shiny in the pics as just washed but are satin black am thinking of going back to Gloss black S wheels??

[rorz_vts]

gloss black ftw :y:

[Bensvts]

gloss black ftw :y:

so u reckon gloss black wheels instead? thats what i was thinking ;).. time to start on outside make that mint..did use to have them then about 5 saxos round my area got them gloss black the same so i changed but think it was wrong move

[LSOfreak]

Thought you might of popped up ;) lol, will get some shortly mate.. need to do a photoshoot really, should do ours together ;)

yeah should, 2 silver mk1's lol
gloss black or even anthracite wheels will look good, but then anthracite wouldnt suit the orange thing your goin for.

did you raise up the rear?

[Bensvts]

yeah should, 2 silver mk1's lol
gloss black or even anthracite wheels will look good, but then anthracite wouldnt suit the orange thing your goin for.

did you raise up the rear?

yeah will go for gloss black..
and should get a photo shoot going on but i ent no good with a camera not unless you are..

And no mate when stipped rear went higher then fitted recond rear axle last week, so is only 10mm lowered, i will get wheels on first then sort that out as wont it sitting right height:y:

[LSOfreak]

ahh i havent got a decent camera, i thought you wouldve lol
oh ye i told a couple mates from c2owners about ace cafe, seem quite interested. my other mate spun out his 106gti in maids and fucked it up into a curb so hes too embarassed to bring it lol

[Bensvts]

ahh i havent got a decent camera, i thought you wouldve lol
oh ye i told a couple mates from c2owners about ace cafe, seem quite interested. my other mate spun out his 106gti in maids and fucked it up into a curb so hes too embarassed to bring it lol

ohh bugger lol ermm i will try get one from some1 or get someone to take them..
ohh wicked, need to sort my oil leak out first :(:(.. hopefully get it sorted this weekend.
oh shit really where abouts? and was he driving like a c**t?

[LSOfreak]

the roundabout where you turn the first left to go towards odeon/highstreet,
somethings up with his bias valve and the rears lock up really easily. was quite funny trying to get it home though cos it could only turn left becuase of a bent shaft/wishbone where it caught the central bit on the road

[Bensvts]

oh right yeah i got ya..yeah its prob fucked mate, yeah i bet lol. O dear is he fixing it then? how many people u got ready for next week?

the roundabout where you turn the first left to go towards odeon/highstreet,
somethings up with his bias valve and the rears lock up really easily. was quite funny trying to get it home though cos it could only turn left becuase of a bent shaft/wishbone where it caught the central bit on the road

[LSOfreak]

yeah, hes fixed most of it now, just need new wheels
well iv asked 4 guys, 2 of them sounded quite sure, both citroen c2 owners

[Bensvts]

oh right thats good then.. should be a good night ill try get a few lads in saxo's to come down and a few extra's but more the merior.. ill sort my oil leak and lower it and ill be happy and ready to go

[Bensvts]

everything from this is now up for sale alot has changed message me if interested in anything. will update it later and with some new pics

[LSOfreak]

selling up??

[Bensvts]

yeah mate let people know. got myself a lil van to work out of. and bike if want some speed ;)

[Adz]

What was the finished bhp and torque on this ?
Mine has ph3 cams and at power bodies a d is 160bhp
I just want more power lol but need to know if its worth it

Adz

[Bensvts]

162 but on standard cam timing and had a air leak. So should see 170+ with timing tweaked. I imagine the torque will be more as well tho

[Mathias]

I'd be interested in the bottom end if you split depending on price

[K567]

sent pm

im defo in for the AT Bodies and probably a few other bits too