PDA

View Full Version : Rear break problem???


danpep91
21st June 2011, 15:18
ok so my 1999 vtr mk1...

I been told i have no rear breaks at all apart from hand break? is this possible i fort it kinda all worked on the same thing its on rear disc and calipers

and surgestions on a fix or do i need to replace the calipers

muttonjeff
21st June 2011, 18:49
If the brake fluid has not been changed for about 5 years they will have seized up with rusty water and brake fluid.

Just swapped two on friday - run a litre of of new fluid thru - Before your replacement calipers go in.

saxo-parts
21st June 2011, 22:38
load sensing valve is the usual suspect before condemning calipers

danpep91
21st June 2011, 22:47
Cheers I got no clues what thar is though mate

saxo-parts
21st June 2011, 22:57
its a valve on top of the rear axle with an arm and spring and a load of pipes coming out of it. If its siezed then it restricts the amount of fluid that can flow to the rear calipers leading to poor footbrake performance.