HOW TO: Fit Cupra R Splitter

[Packham]

Got this new from Seat dealer for 31.54 (+ Vat 37.85)
Part Number 1ML 805 903

http://i1201.photobucket.com/albums/bb349/packham92/DSC03825.jpg

What you will need

Tape
Self Tapping screws
Hacksaw
Screw driver

1
Firstly cut down the two plastic supports in the middle so they are level with the rest of the splitter.

http://i1201.photobucket.com/albums/bb349/packham92/DSC03826.jpg

2
Loosely tape the splitter on and mark off where to trim the ends.

http://i1201.photobucket.com/albums/bb349/packham92/DSC03827.jpg

http://i1201.photobucket.com/albums/bb349/packham92/DSC03828.jpg

3
I found it fitted better if I trimmed the curve off the middle dunno if this is needed on VT's.

http://i1201.photobucket.com/albums/bb349/packham92/DSC03829.jpg

4
Tape the splitter on again but this time a bit more securely.
Jack up the car if it's lowered.

http://i1201.photobucket.com/albums/bb349/packham92/DSC03835.jpg

5
Fix the splitter on by using medium size screws on all of the brackets except the middle two where longer ones are needed.

http://i1201.photobucket.com/albums/bb349/packham92/DSC03834.jpg

6
Job Done. :y:

http://i1201.photobucket.com/albums/bb349/packham92/DSC03836.jpg

[Thomass]

looks good, wouldnt mind seeing it on a vt tho

[Prickle]

i recon a mk3 golf gti splitter would look better. :detective:

got one one mine XD (not a saxo)

[Saxologist]

I thought it looked good with the yellow tape holding it :homme:

Nah, it looks good, mate, car needs to be lower though imo

[Prickle]

I thought it looked good with the yellow tape holding it :homme:

Nah, it looks good, mate, car needs to be lower though imo

nah it looks pretty smart! :D

post some front pics.

[VenoMNL]

A good job was made.. but that lip stays weird on a saxo :P

IMO ofc

[chunkyblader]

heres mine with a mk3 golf splitter :)

http://www.saxperience.com/forum/picture.php?albumid=484&pictureid=6236

[Packham]

Here's a pic of it from the front and colour coded.

The reason I have shaped like that is cus I've fitted it flush to the lip that goes round the bottom of the bumper.

And my cars plenty low enough it scrapes on some speed bumps :homme:

http://i1101.photobucket.com/albums/g439/L1QuiD/Saxp%20East%20Mids/DSC00056.jpg

[Prickle]

heres mine with a mk3 golf splitter :)

cant really see it? first one ive seen on a saxo tbh.

Here's a pic of it from the front and colour coded.

The reason I have shaped like that is cus I've fitted it flush to the lip that goes round the bottom of the bumper.

And my cars plenty low enough it scrapes on some speed bumps :homme:


I like it, suits it well.

[t-dogg]

heres mine with a mk3 golf splitter :)

http://www.saxperience.com/forum/picture.php?albumid=484&pictureid=6236

Holy shit is that front end messed up, out of line and every thing.:fcuk:

[Venns]

Good guide, very smart!

[accerhubbard]

I’ve been measuring up a p reg seat Ibiza one i found at work, but i think it’s a bit too big, anyone seen it done before?

good work btw looks nice.

[kuli280]

Here's a pic of it from the front and colour coded.

The reason I have shaped like that is cus I've fitted it flush to the lip that goes round the bottom of the bumper.

And my cars plenty low enough it scrapes on some speed bumps :homme:

http://i1101.photobucket.com/albums/g439/L1QuiD/Saxp%20East%20Mids/DSC00056.jpg

That looks good colour coded, blends in nicely.

[krissy_vtr]

has anyone else seen or heard of the renault espace splitter being fitted???
a friend told me it adds a nice bulge and looks great but before i consider it i would like to see it?

[CC06NBA]

that is a nice flat arch mate!

[Venns]

Nice to see another decent flat arch

[danpalmer90]

i didnt even realise it was a flat arch it looks that good lol too busy looking at how clean it was.

[Packham]

Thanks for the comments, can I have some on the progress thread ;)