Does my lower engine/box mount need replacing?

[AL3X_]

Noticed this today, when i pull on this mount as in the pic theres a slight tear as can be seen in the pic:

http://i169.photobucket.com/albums/u210/_A_L_3_X_/477150e3.jpg

Will this be causing problems and should I get it replaced?

Cheers

[monka]

doesnt 'need' replaced right no, but it will possibly be causing unneeded movement in the engine, whack an uprated set in there

[AL3X_]

Ah fair enough, how much are uprated ones and will they make the car vibrate like an Ann Summers party lol?

[DanT]

The standard mount is rubbish full stop! Get a nice little powerflex one. Not too bad for everyday use and will solve your issue ;) £25 last time I looked!

[AL3X_]

Ah that sounds alright...is it just the lower one I need thats crap? And I hear they need pressing in is that difficult?

[Ben_SaxoForte]

the powerflex one comes in 2 parts and you just push them in each side and push a metal tube piece through the centre, doesnt need to be pressed. does make the dash vibrate slightly but it seems to subside after its been fitted a while :y:

[DanT]

Easy to fit yes, once bedded in I couldn't even tell mine was there most of the time tbh!

[Mr_P]

Once you fit a powerflex one you'll know if your other two (particular the top one ecu side) need replacing. Cos it'll vibrate like a mofo!

There's some pics in my progress thread of fitting one that may be of some use.

[AL3X_]

Cheers lads, any idea where I can get one of these from?

Cheers

[stevo67]

Gmcmotorsports or Kamracing may sell them if not ebay.

[AL3X_]

Cool, i'll have a look when im at a pc...cheers :y: