Vts oil sensor change *not working*

[S666UKH]

hi guys i cant get the oil sensor off.

i have try using 24m spaner but there not alot of room for the spanner.

any ideas.

new one
http://i315.photobucket.com/albums/ll472/sukh56/photo-11.jpg

http://i315.photobucket.com/albums/ll472/sukh56/photo-10.jpg

[lostzy]

stumpy socket ? might just fit ?

[lostzy]

or get a set off stumpy spanners something like these

http://www.ebay.co.uk/itm/10-PC-COMBINATION-RING-SHORT-STUBBY-SMALL-SPANNER-SET-/280665899420?pt=UK_Hand_Tools_Equipment&hash=item4158fdc19c

[S666UKH]

How about a 24mm deep socket do u think that would fit

[lostzy]

yea a deep one and extension bars to as far as you can go

[lostzy]

tbh it does not matter if you break the plastic cap bit on your old one , just be carefull with your new 1

[S666UKH]

F**k the old lol...I just want it off

I spent 30 mins in the rain and after all that nothing lol.

[lostzy]

lol not good mate

[raunchz]

I got mine off with a ring spanner

[S666UKH]

I got mine off with a ring spanner




My ring spanner won't fit around lol

[S666UKH]

done it..just broke the plug at the top and used a 24mm socket. ;)

[S666UKH]

Hi me again lol

I changed the oil sensor on my VTS because on the dails I had no reading after changing I still have no reading.

[lostzy]

tbh i think its cos itd french mate lols , or you need to reset ecu to tell it it has a new 1 ?

[raunchz]

Oil temp sensor is on the sump at the back

Could be a problem with the loom?

[stevo67]

As Raunchz has said try the loom,trace the wire/s back & look for a break.

[S666UKH]

Oil temp sensor is on the sump at the back

Could be a problem with the loom?

I don't think I have sensor in the sump

[raunchz]

I don't think I have sensor in the sump

That's the reason presumably your oil temp on the dash doesn't work?

[S666UKH]

I don't think mk2 VTS cum with it I think only the mk1 VTS did.




http://i315.photobucket.com/albums/ll472/sukh56/photo-12.jpg