another problem

[huricane]

hi all i got another problem hope some one can help here its goes
when im coming to a stand still like @ lights the car will rev to around 3000 the only way i can get it down is to leave it in gear and put my foot on clutch and it will drop to around 1000/1200 any one have any idea why ??

[luke_vtr_gy]

Does it do , it all the time or just hot or cold ?

[huricane]

when it warms up

[Bedford126]

Clean the idle control valve mate there is a good guide on here by db_sax. Should help bring the revs down.
http://www.saxperience.com/forum/showthread.php?t=174710&highlight=idle+control+valve

[RustySkull]

ICV is leaking or dirty, clean it with some Carb Cleaner :)

[huricane]

was thinking it might be but how easy are they to take off as my is under the inlet mani do i have to take off the inlet mani here a fleebay picture

http://www.ebay.co.uk/itm/CITROEN-SAXO-1-6-MANUAL-IDLE-AIR-CONTROL-VALVE-/280551379479?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41522a5217

cheers all

[huricane]

or can the icv be clean while still on the car maybe if i can get to the pipes which are coming from the icv is to spray carb cleaner dwn them ?

[S666UKH]

Mate that eBay link anit your icv.

Clean it 1st....if it don't work

Try euro car parts it's like 30 pounds new.

[huricane]

so where is it as i cant see any thing that looks like

http://www.saxperience.com/forum/showthread.php?t=174710&highlight=idle+control+valve

[S666UKH]

Look at the guide :) its simple

[huricane]

here few picture if any one can point out if they see it

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0066.jpg

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0065.jpg

[S666UKH]

I can't see it ....

Is Urs mk1 or mk2

[huricane]

mk1....

[S666UKH]

Take picture 4rm the top of the inlet manifold...u can't tell alot 4rm the others pictures

[huricane]

this is the nly thing it could be

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0068.jpg

which is under the inlet mani that got pipes coming from it to the top of the inlet mani if you look @ picture 1 its the pipe to the right the biggest one

[S666UKH]

follow your throttle cable n that will lead u to it


That's what the guide said..

Read the guide replys :)

[huricane]

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0071.jpg

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0070.jpg

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0069.jpg

[S666UKH]

That's werid I thought all vtr/VTS had the same icv...


I think ur could be the one with the White/orange clip.

[huricane]

i think that the throttle position sensor

[S666UKH]

Go to page 3 Of the guide read it...;)

I am on my iPhone cba to copy and paste.

[Bedford126]

Its is the tps. You need to follow the two pipes on the left hand side of the manifold. One of them will be connected to the icv.

[S666UKH]

Its is the tps. You need to follow the two pipes on the left hand side of the manifold. One of them will be connected to the icv.

Is this only on mk1 vtr?

[huricane]

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0071.jpg

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0070.jpg

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0069.jpg

s666ukh so its the thing in picture 1

[S666UKH]

Lol

That's what the guy said the guide


Quote 4rm guide
'In your photo its just out of shot top left on the throttle body mate, with the plug facing back towards drivers seat. Think on a mk1 VTR its just 2 torx screws and the plug.
I'm perhaps gunna get mine off soon and clean it before buying a new one.'

[huricane]

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0072.jpg

thats what there

[stevo67]

s666ukh so its the thing in picture 1

That i`m pretty sure is your MAP sensor that`s where they fit them on early mk1`s.:drink:

[S666UKH]

Yeh that might be it.....because that's what the other guys looked like on his 1.1 Saxo.

Sorry if a confused you, I thought vtr mk1/mk2 had the same icv

[huricane]

if it is how do u clean them ? sealed unit

[S666UKH]

That i`m pretty sure is your MAP sensor that`s where they fit them on early mk1`s.:drink:

I never saw this when I was posting ma bad.

[S666UKH]

if it is how do u clean them ? sealed unit

Stevo goes that's the map sensor...

[huricane]

so still no where near to finding my icv lol

[S666UKH]

Read Bedfords post...

[huricane]

so its got to be

http://www.ebay.co.uk/itm/CITROEN-SAXO-1-6-MANUAL-IDLE-AIR-CONTROL-VALVE-/280551379479?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41522a5217

as the pipe to the left goes to that

[huricane]

be ok if i knew what im looking for lol

[S666UKH]

Yep dats has to be it :)

An again im sorry dude I thought ivc where the same in all VTRs.

We got there in the end but what ever u do dont pay 124 pound for a new one lol

[huricane]

i wont be paying that engines cheaper then that lol

[S666UKH]

Lol :)

[huricane]

you would know what this its connected to throttle body ?

http://i980.photobucket.com/albums/ae288/huricane2010/IMG_0073.jpg

[S666UKH]

Nah man sorry

[huricane]

k cheers