PDA

View Full Version : mk2 vts progress / coments are welcome


ordinary-vts
30th August 2011, 21:16
2010 summer

got a mk2 vts

http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_0312.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_0310.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_0309.jpg

turned out that these OZ's were bent and it was not possible to balance them but
luckily i got 205 SMR's which came with car :clapping:

http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_0431.jpg

and i started with basics

servicing - oil, filters, NGK spark plugs, K&N panel filter
wiper blades
seat covers (coz using car every day to work)
rear ABS sensors x2
rear lights
one light where damaged and other one where tinted
when i started to buy some tinted lights they wouldn’t match with the one I’ve got
so i ended up with about 3 tinted ones and set of white/red (don’t know which model they are from):wall:
boot badge (that where half broken)

2010 okt
then on a way to london i 'lost' one cylinder
and turned out that one injector was down

2011 may
it was time for rear axle refurb so i went down to IM Axle Specialists
new bilstein shock absorbers
powerflex
told them to lower it as well about 40mm
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_0640.jpg

2011 jun
front suspension
new bilstein shock absorbers
springs 30mm
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMAG0050.jpg
new polybushed wishbones
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_0641.jpg :D
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMAG0049.jpg
track rods
link rods
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMAG0055-1.jpg

Gearbox oil (because i didn’t support drive shaft high enough on passangers side) :wall:
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMAG0053.jpg

Lifted bonnet

2011 jul
heat wrapped mani but had no time to fit it jet
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_1028.jpg
de wipered rear


2011 aug
servicing - oil, oil filter, fuel filter +cone filter
ABS sensor (front passengers side)
Sportex de-cat and race tube.
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_1051.jpg
and got some battery cover

and got some C5 'steelies' in a boot now but this is how it looks for now

http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_0659.jpg


just got my hands on 266mm brakes
thanks to mandyslover70
and braided hoses from swampy

2011 sept
got this beauty :)
http://i1219.photobucket.com/albums/dd436/jnsbns/IMG_1123.jpg

just have no idea when i'll get around to fit all that stuff on..
And a have to make some decent cold air feed and heat shield for that filter..

266mm brakes + brake lines are on :D
what thats well worth thing to do. What a differece!!

But gearbox is on it's way now :(

ordinary-vts
8th October 2011, 14:13
got my oil catch tank on at last :D
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_1130.jpg

got my box 'refurbed' (new bearing and seals) and it is on now :D
+
new clutch kit and powerflex lower engine bush

that engine bush makes car shake a bit on idle but once I set off it feels great

have been driving on C5 'steelies' for a while now and got centre caps for them

and colour coded my headlights in mauritius blue

slow-norris
8th October 2011, 16:18
coming along nicely :y:

ordinary-vts
8th October 2011, 22:39
coming along nicely :y:

thanks mate.
working a lot of overtime this year coz of common faults of saxo's like rear axle and now- gearbox and some other bits.

ordinary-vts
13th November 2011, 03:43
8 nov
removed aerial

12 nov
installed my magnex backbox.

22 nov
manifold is on at last
did a bit driving and stopet in local park to let heatwrap to dry
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_1172.jpg
it doesnt look so bad in pic as it actualy was
and it realy draw some attention :D:D:D

http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_1173.jpg

ordinary-vts
14th November 2011, 16:09
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/11112011021.jpg
looks like that now

ordinary-vts
6th December 2011, 17:52
started this december with some servicing again
plugs oil and filters..
and took off alternator belt to check what is making whining noise to find out that i need pulley, but as this where still runing i need a car every day i put it all back together till i get new pulley..
and right after i got pulley old one went to gods...
http://i1219.photobucket.com/albums/dd436/jnsbns/car/IMG_1189.jpg
it is replaced and all good now :D

Jyxo
6th December 2011, 18:38
Looks really good with the C5 steelies.

NismoSteve
6th December 2011, 19:04
Nice tidy S that, I like the pug GTI wheels on it, how much lighter are those c5 wheels compared to the gti ones?

DanTvts
6th December 2011, 20:59
Looks really nice, massive improvement. Best colour as well, but i'm biased!

slimwiltaz
6th December 2011, 21:03
looking smart... very clean ;)

Tom5190
6th December 2011, 21:24
looks good that man nice and tidy

Kanekelly
6th December 2011, 23:38
Love the alloys :) Suit the car well!!
i love the bonnet raisers! should have kept them :) lave your vts though

http://www.saxperience.com/forum/showthread.php?t=405423http://i1183.photobucket.com/albums/x466/kanekelly/vtr.jpg

BONGO1733
7th December 2011, 08:09
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/11112011021.jpg
looks like that now

Very nice :y:

ordinary-vts
9th December 2011, 11:01
Nice tidy S that, I like the pug GTI wheels on it, how much lighter are those c5 wheels compared to the gti ones?

thanks.
I did not weight them but as you can find on forum c5's are about 4,7kg but SMR's about 9,??kg without tyres.

so it is about 4-5 kg save per corner
+ less unsprung mass
+ less rotational mass

If you can't afford some light weight alloys(I can't) then C5's is a way to go, I think.

saxokid100
9th December 2011, 12:09
Realy coming on well mate!! keep up the good work...

ordinary-vts
9th December 2011, 15:01
Love the alloys :) Suit the car well!!
i love the bonnet raisers! should have kept them :) lave your vts though

http://www.saxperience.com/forum/showthread.php?t=405423http://i1183.photobucket.com/albums/x466/kanekelly/vtr.jpg

thanks mate.
took bonnet raisers off becouse almost every time I went for a petrol someone had to say: your bonnet is not closed mate... LOL

GTuff
9th December 2011, 15:24
reli like the steelies against the dark paint center caps set them off aswell :y:

Gandi699
9th December 2011, 15:49
How much did the C5 steels set you back?

james90-2011
9th December 2011, 17:06
Looking good mate can't wait for more updates :)

ordinary-vts
10th December 2011, 00:05
How much did the C5 steels set you back?

40 pounds for 4 from scrapyard :D

ordinary-vts
8th January 2012, 17:50
removed steering wheel and fitted aftermarket one.
would prefare some dished but got this one from a friend for symbolic money.
still nice though

thats airbag light sorted with resistor
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_1204.jpg

and wheel
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/IMG_1206.jpg

ordinary-vts
19th January 2012, 19:59
took some photos on monday :D

http://i1219.photobucket.com/albums/dd436/jnsbns/saxp%20jan%20photos/P1030082.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/saxp%20jan%20photos/P1030066.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/saxp%20jan%20photos/_1030109.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/saxp%20jan%20photos/_1030093.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/saxp%20jan%20photos/_1030091.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/saxp%20jan%20photos/_1030089.jpg

MHepple
19th January 2012, 20:14
Looks ace with the c5's on mate. Never seen them before to be honest. What size are they?

ordinary-vts
19th January 2012, 20:42
Looks ace with the c5's on mate. Never seen them before to be honest. What size are they?


15"mate

ordinary-vts
16th February 2012, 00:53
'sticker bombing' with no stickers after driving 850 miles in three days :D
http://i1219.photobucket.com/albums/dd436/jnsbns/car/DSC_0200.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/car/DSC_0199.jpg

ordinary-vts
4th April 2012, 09:31
done servicing

sparkplugs
oil
oil fiilter
fuel filter
coolant and thermostat

and stripped rear part of car coz some welding needed to be done..

didnt look good at all :(

ordinary-vts
8th June 2012, 00:16
ok now it's been a while since las update..
there is one arch (worst one by far) before welding
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0269.jpg

after welding
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0302.jpg

and passed MOT with no probs at all :D

Edit: took my front grill out before welding as I wanted to paint it.

ordinary-vts
8th June 2012, 00:30
got new 4x uniroyal rainsport 2
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0324.jpg

had no aquaplaning ever since.. with few exceptions (you really have to hit large puddle in speed)

and raised bonnet for a summer time..
still had no time (or just being to lazy) to paint front grill and drove without one lol

fitted lightweight alternator pulleys + belt

ordinary-vts
8th June 2012, 00:35
don't know how it happened but like a month ago mentioned this
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0400.jpg

so I have fixed it now lol
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0401.jpg

ordinary-vts
8th June 2012, 00:37
ordered tow strap
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0503.jpg

still no grill

ordinary-vts
8th June 2012, 00:41
actually i did prepare bits for painting a while ago just couldn't get around to do it
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0398.jpg

ordinary-vts
8th June 2012, 00:45
and i done it this tuesday
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0512.jpg
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0514.jpg

just glued them parts together tonight

DanTvts
8th June 2012, 07:48
Whoa that was rusty! Any rust in the other common places? Glad to see you're keeping it looking good! Best colour :)

ordinary-vts
8th June 2012, 12:28
that was the worst part by far..
there were some rust in 2nd corner but it didn't even leak.. welded anyway..

ordinary-vts
17th August 2012, 20:39
fitted upper and lower strut braces
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0660.jpg

http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0659.jpg

ordinary-vts
17th August 2012, 20:40
some 10 bhp stickers lol
http://i1219.photobucket.com/albums/dd436/jnsbns/vts%20progress/DSC_0658.jpg

DanTvts
18th August 2012, 07:25
Have you got a leaky sump? Looks like its been leaking from somewhere anyway.
Braces look good :y:
Uniroyal Rainsport 2's were my favourite tyres of all the ones i used on the saxo, was surprised by how good they actually are!

ordinary-vts
18th August 2012, 13:54
Have you got a leaky sump? Looks like its been leaking from somewhere anyway.
Braces look good :y:
Uniroyal Rainsport 2's were my favourite tyres of all the ones i used on the saxo, was surprised by how good they actually are!

never cleaned engine and it's always been like soaked but never had to top up oil..
weird..
but it's on to do list as well (someday might do it)
:)