Will these monsters squeeze behind my vts wheels?

[ets2k9]

http://cgi.ebay.co.uk/Peugeot-406-Coupe-V6-front-Brembo-calipers-pair_W0QQitemZ290005738897QQihZ019QQcategoryZ10406 QQrdZ1QQcmdZViewItem

I'm quite taken with them maybe it the "Brembo" stickers and I'm just buying into brand names.

Cheers

Steve

[Simo]

I cant view Ebay at work... what diameter are the discs, or is just calipers?

[Gav]

they are brembo calipers from a pug 406 coupe v6 simo.

[Scott]

Brembo V6 calipers.

Discs are 285mm that go with them, the discs would go under the vts rims its the caliper that will be the problem as they are physically a large caliper, would defo need spacers to clear the caliper though not 100% that thye would fit behind a vts wheel diameter wise

[Gav]

Q: Hi Can you tell me the distance between the two mounting holes please? Thanks.
A: 82mm approx

[ets2k9]

I could drop the bloke selling an email asking him for some more specific measurements of the caliper.

I'll post the reponse if I get one.

[YM03]

I'd be more curios about the dammage!!!! thats just me tho

[Scott]

JonA on ssc had brembo calipers and had to use spacers to get them to clear his super leggras and they have a good bit more cleaerance than vts wheels

[ets2k9]

I know the ones in the link are damaged but I dont have to buy those exact ones I could wait for some undamaged ones.

I'll see if I can track JonA down and drop him a mail.

Cheers

Steve

[YM03]

ok thought you where on about buying the ones in the link

[ets2k9]

What cars calipers will fit a saxo but still give the stopping power and looks of the above calipers?

Cheers

Steve

According to an SSC regular there no way the above will fit.

[saxodan]

I cant view Ebay at work... what diameter are the discs, or is just calipers?


Sorry if its of topic but if you need to view anything at work thats blocked or anything use www.yourfreeproxy.net

Hope that helps!

Dan

[ets2k9]

Sorry if its of topic but if you need to view anything at work thats blocked or anything use www.yourfreeproxy.net

Porn at work, yeah!!!!









P45 in the post ......~NO!!!

[zaine]

theres a lad off ssc who has a s1 106 rallye, mattrallye i think hes called who has just bought these for his, he is runnin on comp mo's i think, i doubt they wud fit under vts wheels, so buy new wheels an make them fit :thumbup:

[ets2k9]

Apparently they can be fitted but not under Vts wheels so thats a bitch.

Someone is selling a complete setup for £400 came of a peugeot but were squeezed under Speedline's.

[mike_vts]

arent 406 coupe alloys 15s like the vts rim

[djrem]

arent 406 coupe alloys 15s like the vts rim

They are 16 inch wheels on the v6:
16 INCH ALLOY WHEELS AND TYRES FROM THE 406 COUPE

Heres a link to some on sale:
http://cgi.ebay.co.uk/406-COUPE-3-0-V6-WHEELS-4-A-BREMBO-4-FOUR-POT-CALIPER_W0QQitemZ180176488778QQihZ008QQcategoryZ23 013QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[jeeves_101]

they will fit behind vts rims, but you'll need 16.5mm spacers, spencer_cammed vts has them behind his vts rims.

and they also fit behind ox leggies and similar, but require smaller spacers if any.

on the oz rims, you need 15mm spacers to fit the wheel to the correct offset, and then they clear fine, so should be ok if wheels have correct offset.

[Scott]

dates....!

[adamsax]

206GTi brakes will see you right:y:

[OLLYVTS]

they will fit behind vts rims, but you'll need 16.5mm spacers, spencer_cammed vts has them behind his vts rims.

and they also fit behind ox leggies and similar, but require smaller spacers if any.

on the oz rims, you need 15mm spacers to fit the wheel to the correct offset, and then they clear fine, so should be ok if wheels have correct offset.


That is right^If you have look at the stickys someone has done a guide of how to fit them behind vts wheels.And have a search as spencer has said about it with pics of how he fitted them.

[spencer_cammedvts]

search for brembos behind vts wheels on this site. iv done it mate. you need 16mm spacers and yes the wheels do still go under the arches.

[Ryan]

dredge ahoy

[bullit]

i miss ets2k9 "tears"

[craigy_87]

yeah where did he go lol

[Mystic]

Oh dear :sad:

STOP ANSWERING QUESTIONS A YEAR & A HALF OLD ;)

[bullit]

yeah where did he go lol

he grew up i think. ill have to get in contact with him when i have a minute :p

[craigy_87]

lol ahhh i hope i grow up one day

[djrem]

Brembo FAQ:
http://www.saxperience.com/forum/showthread.php?t=97318

[craigy_87]

REM your the dude that bumped up the thread from last year hehe :y:

[djrem]

REM your the dude that bumped up the thread from last year hehe :y:

see what i did there ;)

Anyway, inspired so much,

Just won these:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=190169405949&ssPageName=STRK:MEWN:IT&ih=009