PDA

View Full Version : Few questions regarding 16v Conversion.


ed-bradley
27th October 2011, 20:00
As above.

I've bought a bare engine pretty much, and currently sourcing parts for it.

1. My engine has no Oil filter cooler part thing :homme:, Can you run the engine without one? I believe 106 Gti's do, So I'm assuming the Filter would just sit closer to the block? I believe I have to get a screw to screw into the block and then the filter onto that if I do, I've had a decent look but can't seem to find one. I'm guessing I can get one from Citroen though.

2. As the engines going into a 1.1, I have no PAS. Does the pas run off any pipes/outlets coming from the block, Will I need to block these holes etc?

If Anyone has any Engine pictures I'd be eternally grateful.
Thanks, Ed.

Lemmy92
27th October 2011, 21:42
2nd one, As far as I remember from taking mine out, PAS Pump runs independant with a 12v input, so you don't need it for the 16v conversion. Not sure about the first part

ed-bradley
27th October 2011, 21:53
2nd one, As far as I remember from taking mine out, PAS Pump runs independant with a 12v input, so you don't need it for the 16v conversion. Not sure about the first part

Oh shit. My bad. Had a blonde moment then about the pump.:wall:

Of course its a separate unit. Well thats that one nailed then Lol.
Cheers.

boony
27th October 2011, 22:01
Use your 1.1 oil filter insert ,,, if you've got any questions txt me or ring me edd

kennym1987
28th October 2011, 03:56
As above.

I've bought a bare engine pretty much, and currently sourcing parts for it.

1. My engine has no Oil filter cooler part thing :homme:, Can you run the engine without one? I believe 106 Gti's do, So I'm assuming the Filter would just sit closer to the block? I believe I have to get a screw to screw into the block and then the filter onto that if I do, I've had a decent look but can't seem to find one. I'm guessing I can get one from Citroen though.

2. As the engines going into a 1.1, I have no PAS. Does the pas run off any pipes/outlets coming from the block, Will I need to block these holes etc?

If Anyone has any Engine pictures I'd be eternally grateful.
Thanks, Ed.

when i got my gti engine it was more or less a bare engine. there is a few parts you can swap over from your 1.1 engine like the alternator and starter. i have no oil cooler either. and pas is electric.