Will these fit?

[Dale92]

Will these alloy's http://www.ebay.co.uk/itm/270838547030?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649#ht_600wt_1185 Fit my 1.1 forte its std and not been lowered cheers guys.

[saxo_singh]

In simple words..... NO. They will not fit.

[marcusd]

well with some work like adapters to change stud pattern but not really worth effort

[jeffchiz]

they have a PCD (stud pattern) of 4x100 and for a saxo you need 4x108 as said you can buy hub adapters to get them to fit

the add doesnt say what the ET (offset) is, but bare in mind if you buy hub adapters then they are usually 20mm wide which will reduce the offset by 20, for a saxo you need an offset of ET15 so if they were ET35 then a hub adapter 4x100-4x108 20mm wide would be needed

[kennym1987]

the et is 30. it says at the bottom

[jeffchiz]

edit it says they have an offset of 30 so really need a 15mm spacer but 20mm hub adapter
would be fine

[jeffchiz]

the et is 30. it says at the bottom

just saw :afro:

[Dale92]

Ahhh sorrys guys bit off a dope when it comes to cars as ive done things on bikes for years

[jeffchiz]

Ahhh sorrys guys bit off a dope when it comes to cars as ive done things on bikes for years

well like we said just a set of pcd adapters would sort you out if you really wanted them :y:

[saxo_singh]

Buy sutin else, they look lame. If you look hard there's so many wheels out there in 4x108 ;)