My Sax baby :P

[shaggers_saxvtr]

Had my VTR for a few months now and added some tasty (IMO) mods!

Here it is when I had first got it:
http://i58.photobucket.com/albums/g259/shaggers_saxvtr/DSC00393.jpg

Here it is now:
http://i58.photobucket.com/albums/g259/shaggers_saxvtr/DSC00010.jpg

http://i58.photobucket.com/albums/g259/shaggers_saxvtr/IMGP0198.jpg

http://i58.photobucket.com/albums/g259/shaggers_saxvtr/DEWIPERED.jpg

Well, since Ive had it I have removed the ACE 17's and replaced them with Custom painted multispoke 15's purchased from WestyVTR with Khumo tyres all round.
I have replaced the universal Jap style backbox with a Janspeed 3.5 inch inward rolled one and I've put a de-cat on too.
EBC front discs and EBC greenstuff pads.
Sprayed the rear 'Citroen' and 'Saxo' badges black.
De-wipered
Laquered and cleaned several parts in the engine bay
Sprayed the front mesh black
Dimma fuel cap (WIll prob spray this black too)
JBL 1000 watt and Fli 1000 watt subs (both 12inch) with Infinity 6x9s
Sax-p stickers!
Standard Mk2 rear lights instead of LexArse ones
Smoked side repeaters
Removed the rear silver/black tints
Bee sting arial

-Being Lowered 40mm all round on friday
-Black Angel eyes to come
-Enclosed induction to come

Future plans -
Ported and polished head
Cam
ECU remap
4-1 manifold
Straight thru exhaust centre section
Chrome engine bay parts incl rocker cover etc. . .
Finally superchip the beast!
Possibly a VTS or 1.1 gearbox too

AND...finally...if it gets this far...a SUPERCHARGER!!

Comments welcomed!
Cheers :Y:

[Viper]

i like :)

love the alloys..

will look great after the lower!

[shaggers_saxvtr]

Thanks matey!
Only covered 49K too so I look after her!
Heres a pic of the engine bay, pretty clean considering the age...
http://i58.photobucket.com/albums/g259/shaggers_saxvtr/DSC00051.jpg
Only one weird thing here tho - it has a coil pack yet it also has the distributor assy - I was told by citroen it would have been blacnked off with a metal plate. . .?!

[shaggers_saxvtr]

And yes - I know the Power cables needs hiding - the bloke before me did it like that...

[craigy_87]

i like it mate
an ur engine bay is alot better than mine for about the same miles :N: lol
i fancy gettin that induction kit how much ?
craigy

[Karl]

mmmm not bad Nick mate ;p xo
shoulda bought an "S" so shoulda I! :P

[ChrisJ]

Looking good, plans sound exciting too. Needs some standard mirrors though.

[shaggers_saxvtr]

Looking good, plans sound exciting too. Needs some standard mirrors though.

Agreed - dont like the M3's much tbh myself, but I didnt fit them - on car when purchased!

[rayvtr]

nice little car dont know about the arial and the wheels though IMO

[Dan]

Nice matey, looks alot better with the 15's but still sits very high. Will look great when lowered.

[shaggers_saxvtr]

Thanks for the comments guys, am going to look for standard mirrors too as I dont like the M3s much and I cant wait till its lowered but I stillt hink I shoud go lower than 40mm....?!??

[shaggers_saxvtr]

Eibach front springs (45mm) are coming tomorrow, and the rear is being lowered tomorrow too with shorternd billstein shocks 40mm :D:D Cant wait! But got to fit a new gearbox at the weekend as I have lost 5th gear, and reverse is not good either :( Doh...

[ChrisJ]

Nice. But i would go down at least 45mm on the rear, so it is level.

[shaggers_saxvtr]

I may do, however, subs and spare wheel will keep it down lol!

[riggsy]

will look alot better lowered matey

loose the mirrors and fuel cap

[shaggers_saxvtr]

Yeh looking forward to the lowering matey.

Going to spray the dimma fuel cap black as it sticks out like a sore thumb..lol

Good luck with your sale riggsy